Samsung LN32A540P2D user manual Setting Up Anynet+, Scanning and Switching between Anynet+ Devices

Setting Up Anynet+

The following settings help set the Anynet+ functions.

To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On

1.Press the TOOLS button.

Press the ENTER button to select “Anynet+(HDMI-CEC)”.

Press the ▲ or ▼ button to select "Setup", then press the ENTER button.

2.Press the ENTER button to select "Anynet+ (HDMI-CEC)", then press the ENTER

button.

3, Press the ▲ or ▼ button to select "On", then press the ENTER button.

The “Anynet+ (HDMI-CEC)” function is enabled.

If you select “Off”, “Anynet+ (HDMI-CEC)” is disabled.

When the “Anynet+ (HDMI-CEC)” function is disabled, all the Anynet+ related operations are deactivated.

Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off

2.Press the ▲ or ▼ button to select “Auto Turn Off”, then press the ENTER button.

3.Press the ▲ or ▼ button to select "Yes", then press the ENTER button.

The "Auto Turn Off" function is enabled.

If you select "No", the "Auto Turn Off" function is canceled.

Press the EXIT button to exit.

Air28

Recevier: On

Connect Recorder

Setup

Move Enter Return

Anynet+ Setup

Anynet+ (HDMI-CEC) : OffOff

Auto Turn Off: OffOn

Searching Connections

Move	Enter			Return
Anynet+ Setup
Anynet+ (HDMI-CEC)		: On
Auto Turn Off		: OffNo
Searching Connections
			Yes
Move	Enter			Return

The active source on the TV remote must be set to TV to use the Anynet+ function.

If you set “Auto Turn Off” to “Yes”, connected external devices are also turned off when the TV is turned off. If an external device is still recording, it may or may not turn off.

Scanning and Switching between Anynet+ Devices

1.Press the TOOLS button.

Press the ENTER	button to select “Anynet+(HDMI-CEC)”.	Air28
Anynet+ devices connected to the TV are listed.		Recevier: On
		Connect Recorder
2. Press the ▲ or ▼ button to select to a particular device and press the ENTER
		Setup
button. It is switched to the selected device.

3. If you cannot find a device you want, press the ▲ or ▼ button to select "Searching
Connections", then press the ENTER	button.
The meassage "Configuring Anynet+ connection..." is displayed.		Move Enter	Return
When searching devices completes, the connected devices are listed in the Anynet+
menu.			Anynet+ Setup
		Anynet+ (HDMI-CEC)		:	On	►
Switching to the selected devices may take up to 2 minutes. You cannot cancel the		Auto Turn Off		:	Yes	►
operation during the switching operation.		Searching Connections				►
The time required to scan for devices is determined by the number of connected
devices.		Move	Enter			Return
When the device scan is complete, the number of devices found are not displayed.

Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV is already on are not displayed in the device list.

In this case, select the Searching Connections menu to search devices.

If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the TOOLS button.

English - 56