Samsung LN46A750R1F, LN52A750R1F Wireless Network Setup, Settings are automatically configured

Wireless Network Setup

➣The menu is activated only if the Samsung Infolink Wireless adapter is connected. (See page 107)

Auto Setup

➣If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP)

Settings are automatically configured.

➣The wireless IP sharer to be connected to this product must support DHCP.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.

2.Press the ▲ or ▼ button to select “Wireless Network Setup”, then press the

ENTER button.

3.Press the ENTER button to select “Internet Protocol Setup”.

4.Press the ▲ or ▼ button to select “Auto Setup”, then press the ENTER button.

➣The Internet Protocol is set automatically.

➣Select “Access Point Select” to check the network connectivity. (Refer to page 111)

Press the EXIT button to exit.

Manual Setup

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.

2.Press the ▲ or ▼ button to select “Wireless Network Setup”, then press the

ENTER button.

	Network selection	: Wireless
Setup	Cable Network Setup
	Wireless Network Setup		►
	V-Chip
	Caption
	External Settings
	Entertainment	: Off
	Energy Saving	: Off
	PIP
	SW Upgade

Wireless Network Setup

Internet Protocol Setup	: Auto
		AutoSetup
Network Test		Manual Setup
Access Point Select	: AP1
IP Address	:	0	0	0	0
Subnet Mask	:	0	0	0	0
Gateway	:	0	0	0	0
DNS Server	:	0	0	0	0
Move			Enter		Return

	Network selection	: Wireless
Setup	Cable Network Setup
	Wireless Network Setup		►
	V-Chip
	Caption
	External Settings
	Entertainment	: Off
	Energy Saving	: Off
	PIP
	SW Upgade

3.Press the ENTER button to select “Internet Protocol Setup”.

4.Press the ▲ or ▼ button to select “Manual Setup”, then press the ENTER button.

5.Press the ▲, ▼, ◄ or ► button to move to an item, and press the numeric button to configure the selected item. Press the ENTER button.

➣If you want to use a static IP address, refer to the user manual of your wireless IP sharer.

➣Select “Access Point Select” to check the network connectivity. (Refer to page 111)

Press the EXIT button to exit.

Wireless Network Setup

Internet Protocol Setup	: Auto Setup
		Auto Setup
Network Test		Manual Setup
Access Point Select	: AP1
IP Address	:	0	0	0	0
Subnet Mask	:	0	0	0	0
Gateway	:	0	0	0	0
DNS Server	:	0	0	0	0
Move			Enter		Return
Cable Network Setup
Internet Protocol Setup	: Manual Setup
Network Test
Access Point Select	: AP1
IP Address	:
		0	0	0	0
Subnet Mask	:	0	0	0	0
Gateway	:	0	0	0	0
DNS Server	:	0	0	0	0
Move			Enter		Return

English - 110