Samsung LN46A750R1F, LN52A750R1F Operation Turning the TV On and Off, Plug & Play Feature

Operation

Turning the TV On and Off

Press the POWER button on the remote control.

You can also use the POWER button on the TV.

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently.

1.Press the POWER button on the remote control.

The message “Menu Language, Store Demo, Channels and Time will be set.” is displayed.

Press the ENTER button, then “Select language of the OSD.” menu is automatically displayed. Press the ENTER button.

Plug & Play

Menu Language, Store Demo, Channels and Time will be set.

OK

Enter

2.Press the ▲ or ▼ button to select language, then press the ENTER button.

The message “Select ‘Home Use’ when installing this TV in your home.” is displayed.

3.Press the ◄ or ► button to select “Store Demo” or “Home Use”, then press the

ENTER button. The message “Select the Antenna source to memorize.” is displayed.

➣We recommend setting the TV to “Home Use” mode for the best picture in your home environment.

➣“Store Demo” mode is only intended for use in retail environments.

➣If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use” (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

Plug & Play

Select language of the OSD.

English

Menu Language	: EnglishEspañol
	Français
	Move	Enter
	Plug & Play

Select ‘Home Use’ when installing this TV in your home.

Store Demo	Home Use
	Move	Enter
Plug & Play
Select the Antenna source to memorize.
Air		Start
Cable		Start
Auto		Start
Move	Enter	Skip

4.Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the ENTER button to select “Start”.

➣Air: “Air” antenna signal.

Cable: “Cable” antenna signal.

Auto: “Air” and “Cable” antenna signals.

➣In Cable mode, you can select the correct signal source among STD,

HRC, and IRC by pressing the ▲,▼,◄ or ► button, then press the

ENTER button. If you have Digital cable, select the cable system signal source for both Analog and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.

Auto Program

Selects the cable system.

Analog	STD	HRC	IRC
Digital	STD	HRC	IRC
	Start
	Move	Enter	Skip
	Plug & Play
Auto Program in Progress.
DTV Air : 02	Air : 11
DTV Cable : 23	Cable : 21		Cable 38
			50%
	Stop
		Enter	Skip

English - 14