Samsung LN46A750RF Turning the TV On and Off, Viewing the Menus, Selecting the antennas

Turning the TV On and Off

Press the POWER button on the remote control. You can also use the POWER button on the TV.

Viewing the Menus

With the power on, press the MENU button.

1 The main menu appears on the screen.

The menu’s left side has icons: Picture, Sound, Channel, Setup, Input, Application.

Press the ▲ or ▼ button to select one of the icons.

2 Then press the ENTER button to access the icon’s sub-menu. Press the EXIT button to exit.

➣To move to a lower menu, turn the wheel clockwise when the menu Display is displayed. To move to a higher menu, turn the wheel counterclockwise.

➣The on-screen menus disappear from the screen after about one minute.

Storing Channels in Memory (Automatic Method)

Press the MENU button to display the menu.

1 Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.

	Press the ▲ or ▼ button to select “Auto Program”,
2
	then press the ENTER button.
	Press the ▲ or ▼ button to select the antenna
3
	connection, then press the ENTER button.

Auto Program

Select the Antenna source to memorize.

Air		Start
Cable		Start
Auto		Start
Move	Enter	Return

4	When selecting the Cable TV system: Press the
	ENTER button to start the auto program.

Press the ▲,▼, ◄ or ► to select the correct analog signal cable system source among “STD”, “HRC”, and “IRC”. Press the ▲ or ▼ button to select “Start”, then press the ENTER button. If you have Digital cable TV, select the cable system signal source for both Analog and Digital.

Auto Program

Selects the cable system.

Analog	STD	HRC	IRC
Digital	STD	HRC	IRC

Start

Move Enter Return

	The TV begins memorizing all available stations.
5
	Press the EXIT button to exit.
			Auto Program
		Auto Program in Progress.
		DTV Cable : 12	Cable : 32		Cable 38
					50%
			Stop
				Enter	Return
			Auto Program
		Removing scrambled channel.
		DTV Cable : 16	Cable : 45	DTV Cable 41
					77%
			Stop
				Enter	Return

➣After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears.

To Stop the Auto Program Function

Press the MENU button while the Auto Program function is being executed. You can also press the ENTER button to stop the setup.

Checking to see if Channels were Stored in Memory

Press the CH button. Only the channels stored in memory will be selected (in order).

Selecting the antennas

•Air: “Air” antenna signal.

•Cable: “Cable” antenna signal.

•Auto: “Air” and “Cable” antenna signals.

English-