Connecting the Monitor

1.Connect the DC 14V adapter for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.

2-1.Using the D-Sub (analog) connector on the video card.

Connect the 'DVI-A to D-Sub' Cable to the DVI-I port on the back of your monitor.

2-2.Connected to a Macintosh.

Connect the monitor to the Macintosh computer using the 'DVI-A to D-Sub' connection cable.

2-3.In the case of an old model Macintosh, you need to connect the monitor using a special Mac adapter.

3.Turn on your computer and monitor. If your monitor displays an image, installation is complete.

If you properly connect your monitor using the DVI-I connector but get a blank screen, check to see if the monitor status is set to analog. Press power button to have the monitor double- check the input signal source.