Internet, Text, Custom, Contrast, Coarse

depending on the contents of the image you are watching.

Currently four different modes are available: Entertain, Internet,Text and Custom.

Each mode has its own pre-configured brightness value.

You can easily select one of four settings by simply pressing the MagicBright™ control button.

- The direct button on the remote control is 'M/B' button. Entertain

For watching motion pictures such as a DVD or VCD.

Internet

For working with a mixture of images such as text and graphics.

For documentations or works involving heavy text.

	Custom
	Although the values are carefully chosen by our engineers, the pre-
	configured values may not be comfortable to your eyes depending on your
	taste. If this is the case, adjust the Brightness and Contrast by using the
	OSD menu.
Custom	You can use the on-screen menus to change the contrast and brightness
	according to personal preference.
	Contrast
	: Adjust the Contrast.
	Brightness
	: Adjust the Brightness.

If you adjust picture using Custom function, MagicBright will turn to Custom mode.

Color Tone The tone of the color can be changed.

Available in PC/DVI Mode Only

Color Control Adjust the individual R, G, B color controls.

-Available in PC Mode Only

Red

Green

Blue

If you adjust picture using Color Control function, Color Tone will turn to Custom mode.

Image Lock	Image Lock is used to fine tune and get the best image by removing noise
	that creates unstable images with jitter and shimmer. If satisfactory results
	are not obtained using the Fine adjustment, use the Coarse adjustment and
	then use Fine again.
	- Available in PC Mode Only
	Coarse
	: Removes noise such as vertical stripes.
	Coarse adjustment may move the screen image area.
	You may relocate it to the center using the Horizontal Control menu.
	Fine
	: Removes noise such as horizontal stripes.
	If the noise persists even after Fine tuning, repeat it after adjusting the
	frequency (clock speed).
	Sharpness
	- When the Source is set to DVI, only this function operates.
	: Adjust the Sharpness.
	Position
	: Adjusts the screen location horizontally and vertically.
Auto	The values of Fine, Coarse, Position are adjusted automatically.
Adjustment	If you change resolution in the control panel, Auto function will be executed.
	- Available in PC Mode Only
	- The direct button on the remote control is 'AUTO' button.
Size	You can switch the Size.
	Wide
	4:3
PIP Picture	You can adjust the PIP Screen Settings.
	Contrast
	: Adjusts the Contrast of the PIP window on the screen.

Coarse / Fine

Sharpness

Position