Samsung LS22MEWSFV/ILC, LS20MEWSF1/XSJ manual Connecting Cables, Using the Stand, Monitor Assembly

Connecting Cables

Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.

Use a connection appropriate for your computer.

Using the D-sub (Analog) connector on the video card.

- Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.

[RGB IN]

Using the DVI (Digital) connector on the video card.

- Connect the DVI Cable to the DVI Port on the back of your Monitor.

[DVI IN (HDCP)]

Connected to a Macintosh.

-Connect the monitor to the Macintosh computer using the D-sub connection cable.

If the monitor and the computer are connected, you can turn them on and use them.

Using the Stand

Monitor Assembly