Samsung LS22TDDSU2/EN, LS20TDVSUV/EN, LS24TDVSUV/EN, LS24TDDSUV/EN Connecting a Component cable

Connections

3.When all the connections are completed, connect the power cords for the monitor and DVD (or the device connected to the digital output terminal).

4.Select "HDMI" using the 'SOURCE []' button.

Note

If you just connect using the DVI to HDMI cable without connecting to the sound source, you cannot hear sound.

Connecting the audio output terminal of a digital device to the [R-AUDIO-L]of [COM- PONENT IN] of the monitor using an audio cable will not give you sound. Make sure to connect to the [HDMI / PC/DVI-D AUDIO IN] terminal of the monitor.

Connecting a Component cable

Note

Connect to the DVD / DTV Set Top Box input if the device has a [COMPONENT IN] connector. You can watch Component simply by hooking up the Component with the monitor as long as the power is on.

Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [R-AUDIO-L]port of the monitor.

Connect the VIDEO OUT port of the DVD / DTV Set-Top Box to the [PR, PB,Y] input ports using a component video cable (PR, PB,Y).

Note

Select "Component" using the 'SOURCE []'

If you connect the PR, PB, and Y component cables to the incorrect terminals, the screen will be displayed in red or blue.

For single-family houses, install an UHF antenna to receive digital broadcasting.