6Setup and Reset
6.5Key Repeat Time
Control the response rate of a button when the button is pressed.
The functions available on the monitor may vary depending on the model. Refer to the actual product.
6.5.1 Configuring Key Repeat Time
1When the Function Key Guide appears, select [] by pressing [] button on the DOME Type JOG Button.
Next, press the [] button.
2Press [] button to move to SETUP&RESET and press [] button on the monitor.
3Press [] button to move to Key Repeat Time and press [] button on the monitor. The following screen will appear.
SETUP&RESET
Reset All
Eco Saving Plus |
| Off | |
Off Timer |
|
|
|
|
|
| |
| Acceleration |
| |
PC/AV Mode |
|
| |
| 1 sec | ||
|
| ||
Key Repeat Time |
| Acceleration | |
|
| 2 sec | |
Source Detection |
| Auto | |
Power LED On |
| No Repeat | |
|
|
|
Configure the response rate of a button when the button is pressed.
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is pressed.
4Move the focus to the desired option by pressing [] button on the DOME Type JOG Button. Press [] button.
5The selected option will be applied.
6 Setup and Reset 69