Samsung LS20PEBSFV/XSV, LS22PEBSFV/EDC manual Graphic cards DVI in port using the DVI cable, Rear

Adjust buttons [ ]	Adjust items in the menu.
Enter button [ ] /	Activates a highlighted menu item. /
SOURCE button	Push the 'SOURCE', then selects the video signal while the OSD is
	off. (When the SOURCE button is pressed to change the input mode,
	a message appears in the upper left of the screen displaying the
	current mode -- analog or digital input signal.)
	If you select the digital mode, you must connect your monitor to the
	graphic card's DVI IN port using the DVI cable.
AUTO button	Use this button for auto adjustment.
	>> Click here to see an animation clip
Power button [ ]	Use this button for turning the monitor on and off.
Power indicator	This light glows blue during normal operation, and blinking blue once
	as the monitor saves your adjustments.

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.

Rear

The configuration at the back of the monitor may vary from product to product.

POWER port	Connect the power cord for your monitor to the power port on the back of the
	monitor.
DVI IN port	Connect the DVI Cable to the DVI IN port on the back of your monitor.
RGB IN port	Connect the signal cable to the 15-pin, D-sub port on the back of your
	monitor.
Kensington Lock	The Kensington lock is a device used to physically fix the system when using
	it in a public place.
	The locking device has to be purchased separately.
	For using a locking device, contact where you purchase it.

See Connecting Cables for further information regarding cable connections.