Panasonic KX-TDA100 Changing the Display Language of the PS, PS Termination, Using the KX-TD7580

2.8.7 Connecting a Cell Station to the PBX

Setting the Personal Identification Number (PIN) for PS Registration

To prevent registering the PS to a wrong PBX, a PIN for PS registration can be set to the PBX. Before registering the PS to the PBX, enter the PIN set to the PBX into the PS. By doing so, the PS will only be registered to the PBX with the matching PIN.

Note

•By default, the PIN for PS registration is "1234" for both the PBX and PS. Therefore, the PS can be registered to the PBX without setting the PIN.

•The PIN for PS registration will only be used when registering the PS to the PBX. Therefore, during normal operation after registration, even if there is more than 1 PBX with the same PIN near the PS, the PS will not be inadvertently linked to a different PBX.

Setting the PIN for PBX

[692]	PIN for PS Registration
ENTER	4 digits	ENTER	END
	1234		(HOLD)

Changing the Display Language of the PS

Using the KX-TCA155/KX-TCA255/KX-TCA256/KX-TCA355

Press POWER	Select	Select
for 2 seconds.	"Setting Handset".	"Display Option".

Select	Select the desired
"Select Language".	language.

Using the KX-TD7590

F 0

Press POWER for 5 seconds.

SELECT

/

Select the desired language.

SELECT	SELECT
/	/
Select	Select
"DISPLAY SETTING".	"LANGUAGE".

SELECT

Using the KX-TD7580

Press POWER		/	/
		Select		Select
for 2 seconds.		"Setting Handset".		"Display Option".
/	/
Select "Select		Select the desired
Language".		language.

PS Termination

Confirm the following before cancelling the PS registration:

•The PS is turned on.

176

Installation Manual