Panasonic KX-TDA100 installation manual 2.4.9 PRI30 Card KX-TDA0290CE/KX-TDA0290CJ, Function

2.4.9 PRI30 Card (KX-TDA0290CE/KX-TDA0290CJ)

2.4.9 PRI30 Card (KX-TDA0290CE/KX-TDA0290CJ)

Function

1-port ISDN Primary Rate Interface card (30B channels). EURO-ISDN/ETSI compliant.

LEDs

RJ45

To NT1/Extension

To NT1/Extension

For RJ45

BNC (TX)

BNC (RX)

120Ω 120Ω

For BNC 75Ω OR 75Ω

A B

Accessories and User-supplied Items

Accessories (included): Ferrite core × 1

User-supplied (not included): RJ45 or BNC connector

CAUTION

•When connecting this optional service card to the trunk, connect through an NT1; do not connect to the U interface of the trunk directly.

•PRI ports are SELV ports and should only be connected to SELV services.

Notice

When connecting the RJ45 connector, attach the included ferrite core. Refer to "2.2.9 Attaching a Ferrite Core".

Note

•In some countries/areas, this optional service card must not be connected to the Public Switched Telephone Network.

•Use only 1 type of connector (RJ45 or BNC) for connection; RJ45 and BNC cannot be used simultaneously.

•This optional service card can be used for either trunk or extension connection, by setting the A/B switch or using the connector with appropriate pin assignments.

•To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "2.14.1 Starting the PBX".

96

Installation Manual