Panasonic KX-TDA100 2.4.8 BRI4 Card KX-TDA0284 and BRI8 Card KX-TDA0288, Function

2.4.8 BRI4 Card (KX-TDA0284) and BRI8 Card (KX-TDA0288)

2.4.8 BRI4 Card (KX-TDA0284) and BRI8 Card (KX-TDA0288)

Function

BRI4: 4-port ISDN Basic Rate Interface card with 1 power failure transfer port. EURO-ISDN/ETSI compliant.

BRI8: 8-port ISDN Basic Rate Interface card with 1 power failure transfer port. EURO-ISDN/ETSI compliant.

LEDs

RJ45 (LINE 1 to LINE 8)

B A

To NT1/Extension

Accessories and User-supplied Items

Accessories (included): Ferrite core(s) × 1 (BRI4 card) or 2 (BRI8 card)

User-supplied (not included): RJ45 connector

CAUTION

•If the connected ISDN terminal has no external power source, make sure that the power is supplied from the BRI4/BRI8 card by programming the PBX accordingly.

However, if there is an external power source to the terminal, make sure that there is no power supplied to the terminal from the BRI4/BRI8 card. Failure to do so may cause damage to the power supply circuit of the BRI4/BRI8 card or the terminal.

•When connecting these optional service cards to the trunk, connect through an NT1; do not connect to the U interface of the trunk directly.

Notice

When connecting the RJ45 connector, attach the included ferrite core. Refer to "2.2.9 Attaching a Ferrite Core".

Note

•LINE 5 to LINE 8 are for BRI8 card only.

•These optional service cards have 100 Ω of terminal resistance. For use in point to multi-point connection, the cards must be placed at the end of the bus.

•These optional service cards can be used for either trunk or extension connection, by setting the A/B switch or using the connector with appropriate pin assignments.

•For details about power failure transfer, refer to "2.13.1 Power Failure Connections".

•To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "2.14.1 Starting the PBX".

92

Installation Manual