Manuals / Panasonic / Kitchen Appliance / Oven

Panasonic KX-TDA100 Equipment Compatibility, Compatible Panasonic Proprietary Telephones, 2.4 GHz

Models: KX-TDA100

1 282

Download 282 pages 61.74 Kb

Page 4

Cell Stations

System Components

Category		Model No.

Cell Stations	2.4 GHz	KX-TDA0141
(CSs)
		KX-TDA0142
		KX-TDA0151
		KX-TDA0152


	DECT	KX-TDA0141CE
		KX-TDA0142CE
		KX-TDA0158CE


	DECT 6.0	KX-TDA0155
		KX-TDA0158

Description

2-Channel Cell Station Unit Using a DHLC/DLC Card (PT-interface CS) for 2.4 GHz Portable Station

3-Channel Cell Station Unit Using a CSIF Card for 2.4 GHz Portable Station

2-Channel Cell Station Unit Using a DHLC/DLC Card (PT-interface CS) for 2.4 GHz Portable Station

3-Channel Cell Station Unit Using a CSIF Card for 2.4 GHz Portable Station

2-Channel Cell Station Unit Using a DHLC/DLC Card (PT-interface CS) for DECT Portable Station

4-Channel Cell Station Unit Using a CSIF Card for DECT Portable Station

8-Channel High-density Cell Station Unit Using a DHLC/DLC Card (PT-interface CS) for DECT Portable Station

DECT 6.0 2-Channel Cell Station Unit Using a DHLC/ DLC Card (PT-interface CS) for DECT 6.0 Portable Station

DECT 6.0 8-Channel Cell Station Unit Using a DHLC/ DLC Card (PT-interface CS) for DECT 6.0 Portable Station

Proprietary Equipment

KX-A228 KX-A229

KX-A258

KX-T30865 KX-T7765

S/M-type Back-up Battery Cable

L-type Back-up Battery Cable

Blank Slot Cover

Doorphone

Equipment Compatibility

Compatible Panasonic Proprietary Telephones

The PBX supports the following telephones:

•Digital proprietary telephones (e.g., KX-DT300 series)

•Analogue proprietary telephones (e.g., KX-T7700 series)

•IP proprietary telephones (e.g., KX-NT300 series)

•Portable stations (e.g., KX-TCA355, KX-TCA256, KX-TD7690)

•DSS consoles (e.g., KX-DT390)

•Single line telephones (e.g., KX-T7710)

Incompatible Panasonic Proprietary Telephones

The PBX does not support the following telephones:

•KX-T30800 series proprietary telephones and DSS consoles

•KX-T61600 series proprietary telephones and DSS consoles

•KX-T123200 series proprietary telephones and DSS consoles

•KX-TD7500 DECT portable station

4

Installation Manual

Image 4

Panasonic KX-TDA100 Equipment Compatibility, Compatible Panasonic Proprietary Telephones, Category, Model No, 2.4 GHz

Contents

Hybrid IP-PBX Installation ManualKX-TDA200 Model No. KX-TDA100System Components System Components TableCategory Model NoPower Supply Units CategoryModel No Extension CardsEquipment Compatibility Compatible Panasonic Proprietary TelephonesIncompatible Panasonic Proprietary Telephones CategorySafety Notices List of AbbreviationsImportant Safety Instructions SAVE THESE INSTRUCTIONSImportant Information SAFETY REQUIREMENTSSAVE THESE INSTRUCTIONS For All Telephone EquipmentSAFETY REQUIREMENTS For All Telephone EquipmentFor the PBX For the Cell Station 2.4 GHz Cell Station Except for KX-TDA0151CNWhat is User Information? SAFETY REQUIREMENTS For All Telephone EquipmentSECURITY REQUIREMENTS DECT 6.0 Cell StationFor the PBX a. Disconnect the PBX from all trunksPrecaution FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLYFor users in the United Kingdom This appliance must be earthedNote for the battery symbol bottom two symbol examples For users in the European Union onlyFor users in Germany only For users in New Zealand onlyFor users in Australia only For users in Taiwan onlyIntroduction Section 2 InstallationSection 3 Guide for the Maintenance Console Section 4 TroubleshootingTable of Contents InstallationSystem Outline Information about the Extension CardsInformation about the Other Cards Connection of ExtensionsConnection of DECT Portable Stations Connection of 2.4 GHz Portable Stations3 Guide for the Maintenance Console TroubleshootingAppendix IndexTable of Contents Installation ManualSection System Outline Networking Features Built-in Small Call Centre FeaturesComputer Telephony Integration CTI Features Voice Mail FeaturesPortable Station PS Features PC Phone/PC Console FeaturesHospitality Features Built-in Simplified Voice Message SVM Features1.2 Basic System Construction 1.2.1 Basic ShelfConstruction of the Basic Shelf 1.2.1 Basic Shelf1.2.2 System Connection Diagram 1.2.2 System Connection Diagram1.2.2 System Connection Diagram Mountable Equipment1.3 Optional Equipment 1.3.1 Optional EquipmentModel No Model NameModel Name Model NoDescription Model Name Model NoDescription Specifications 1.4.1General Description SwitchingDimension Weight when fully mounted 1-pair wire D1, D24-pair wire D1, D2 1-pair wire D1, D21.4.2 Characteristics Trunk Loop Limit Hookswitch Flash/Recall Timing RangeTerminal Equipment Loop Limit Minimum Leakage Resistance Maximum Number of Extension Instruments per Line Ring VoltageMaximum Optional Service Cards 1.4.3 System CapacityCards Installed in the Slots of the PBX Installed inInstalled in Card TypeMaximum Number KX-TDA100Installed in Card TypeMaximum Number KX-TDA100Cards Mounted on Other Optional Service Cards Card TypeMaximum Number KX-TDA100Maximum Terminal Equipment KX-TDA100KX-TDA200 Terminal Equipment TypeMEC Card Calculation MEC Card CalculationCalculation Example KX-TDA100 Equipment TypePower Supply Unit Selection Load Figure CalculationPSU Capacity Equipment TypeEquipment Type Calculation Example KX-TDA200Load Figure Section Installation 2.1 Before Installation 2.1.1 Before InstallationSafety Installation Instructions Installation Precautions9. Use twisted pair cable for trunk connection 2.2 Installation of the PBX 2.2.1 UnpackingKX-TDA100 KX-TDA2002.2.2 Names and Locations Inside ViewE F G HE I H KX-TDA1002.2.3 Opening/Closing the Front Cover Opening the Front CoverClosing the Front Cover 2.2.4 Installing/Replacing the Power Supply Unit FunctionAccessories and User-supplied Items Safety InstructionsInstalling the Power Supply Unit Replacing the Power Supply Unit 1. Unplug the AC power cord and Back-up Battery Cable2.2.4 Installing/Replacing the Power Supply Unit Screws2.2.4 Installing/Replacing the Power Supply Unit 5. Follow the steps in Installing the Power Supply Unit4. Replace the PSU 2.2.5 Frame Earth Connection Connect the frame of the PBX to earth2.2.6 Backup Battery Connection Backup Power Supply DurationConnecting Backup Batteries Battery Capacity2.2.6 Backup Battery Connection Battery SwitchBattery Connector Back-up Battery Cable2.2.7 Installing/Removing the Optional Service Cards Installing Optional Service Cards3. Turn the 2 screws clockwise to fix the card in place Screws 2.2.7 Installing/Removing the Optional Service CardsMake sure the screws are tightened to earth the card securely Covering the Blank Slots 2.2.7 Installing/Removing the Optional Service Cards For safety reasons, do not stretch, bend, or pinch the AC power cordHandling of the Cables 2.2.7 Installing/Removing the Optional Service Cards Removing the Optional Service Cards1. Turn the 2 screws anticlockwise to loosen them Screws 2.2.8 Types of Connectors Connector TypePin Number Used forPin Number Connector TypeUsed for 2.2.9 Attaching a Ferrite Core Attaching to an RJ45 ConnectorFor T1/E1/PRI/IP-GW16/IP-EXT16 Cards For a BRI Card Attaching to an Amphenol Connector For Extension Cards2.2.10 Fastening Amphenol Connector 2.2.10 Fastening Amphenol ConnectorAmphenol Connector Pin Assignment Chart 2.2.10 Fastening Amphenol ConnectorPin No DID82.2.11 Wall Mounting KX-TDA200 2.2.11 Wall Mounting KX-TDA200Screw B 2.2.11 Wall Mounting KX-TDA2002.2.12 Wall Mounting KX-TDA100 WallScrew B 2.2.12 Wall Mounting KX-TDA1002.2.13 Floor Standing KX-TDA200 Only 2.2.13 Floor Standing KX-TDA200 OnlyScrews B Metal Bracket Installation 2.2.14 Surge Protector InstallationOverview Outside Installation Installation of an Earth Rod4. Bury the earth rod at least 50 cm underground 2.3.1 MPR Card 2.3 Information about the Main Processing CardFunction LED Indications IndicationColour Description2.3.2 MEC Card KX-TDA0105 Accessories and User-supplied ItemsAccessories included Screws × User-supplied not included none Function2.3.3 RMT Card KX-TDA0196 Accessories and User-supplied ItemsAccessories included Screws × User-supplied not included none Function2.4 Information about the Trunk Cards Accessories and User-supplied ItemsAccessories included Screws × User-supplied not included Amphenol connectorPin Assignments Amphenol ConnectorSignal Name Signal Name2.4.2 DID8 Card KX-TDA0182 Accessories and User-supplied ItemsAmphenol Connector Accessories included Screws ×LED Indications IndicationColour DescriptionSwitch Settings on LCOT8/LCOT16 cards 2.4.3 CID/PAY8 Card KX-TDA0189Accessories and User-supplied Items Accessories included Screws × User-supplied not included none2.4.4 CID8 Card KX-TDA0193 Switch Settings on LCOT8/LCOT16 cardsAccessories and User-supplied Items Accessories included Screws × User-supplied not included none2.4.5 E&M8 Card KX-TDA0184 Accessories and User-supplied ItemsAmphenol Connector Accessories included Screws ×Signal Name Signal NameLED Indications FunctionSwitch Settings 2.4.6 T1 Card KX-TDA0187Accessories and User-supplied Items Accessories included Ferrite core ×RJ45 Connector for Trunk Use RJ45 Connector for Extension UseSignal Name Signal NameMaximum Cabling Distance of Extension Connection IndicationColour Description2.4.7 E1 Card KX-TDA0188 Accessories and User-supplied ItemsAccessories included Ferrite core × User-supplied not included RJ45 or BNC connectorSwitch Settings RJ45 Connector for Trunk UseRJ45 Connector for Extension use BNC coaxial Connector TXBNC coaxial Connector RX Signal NameLED Indications Maximum Cabling Distance of Extension Connection2.4.8 BRI4 Card KX-TDA0284 and BRI8 Card KX-TDA0288 Accessories and User-supplied ItemsUser-supplied not included RJ45 connector FunctionSwitch Settings RJ45 Connector for Trunk UseRJ45 Connector for Extension Use SwitchLINE LED Pattern IndicationColour DescriptionMaximum Cabling Distance of S0 Bus Connection 2.4.9 PRI30 Card KX-TDA0290CE/KX-TDA0290CJ Accessories and User-supplied ItemsAccessories included Ferrite core × User-supplied not included RJ45 or BNC connectorSwitch Settings RJ45 Connector for Trunk UseRJ45 Connector for Extension Use BNC coaxial Connector TXLED Indications Maximum Cabling Distance of Extension ConnectionIndication Colour2.4.10 PRI23 Card KX-TDA0290 Switch SettingsAccessories and User-supplied Items Accessories included Ferrite core ×RJ45 Connector for Trunk Use RJ45 Connector for Extension UseSignal Name Signal NameMaximum Cabling Distance of Extension Connection IndicationColour Description2.4.11 IP-GW4 Card KX-TDA0480 Accessories and User-supplied ItemsRJ45 Connector 10BASE-T User-supplied not included RJ45 connectorLED Indications IndicationColour Description2.4.12 IP-GW4E Card KX-TDA0484 Accessories and User-supplied ItemsRJ45 Connector 10BASE-T/100BASE-TX User-supplied not included RJ45 connectorLED Indications IndicationColour Description2.4.13 IP-GW16 Card KX-TDA0490 Accessories and User-supplied ItemsRJ45 Connector 10BASE-T/100BASE-TX User-supplied not included RJ45 connectorLED Indications IndicationColour Description2.5 Information about the Extension Cards 2.5.1 CSIF4 Card KX-TDA0143 and CSIF8 Card KX-TDA0144Accessories and User-supplied Items Accessories included none User-supplied not included RJ45 connectorRJ45 Connector Signal NamePin Assignments LED Indications2.5.2 DHLC8 Card KX-TDA0170 Accessories and User-supplied ItemsAmphenol Connector Accessories included Screws × 2, Ferrite core ×Signal Name LED IndicationsFunction Function2.5.3 DLC8 Card KX-TDA0171 Accessories and User-supplied ItemsAccessories included Screws × 2, Ferrite core × User-supplied not included Amphenol connectorAmphenol Connector Signal NameSignal Name Pin Assignments2.5.4 DLC16 Card KX-TDA0172 Accessories and User-supplied ItemsAccessories included Screws × 2, Ferrite core × User-supplied not included Amphenol connectorAmphenol Connector Signal NameSignal Name Pin Assignments2.5.5 SLC8 Card KX-TDA0173 Accessories and User-supplied ItemsAccessories included Screws × 2, Ferrite core × User-supplied not included Amphenol connectorAmphenol Connector Signal NameSignal Name Pin Assignments2.5.6 EXT-CID Card KX-TDA0168 Accessories and User-supplied ItemsAccessories included Screws × User-supplied not included none FunctionAccessories and User-supplied Items Accessories included Screws × 2, Ferrite core ×User-supplied not included Amphenol connector FunctionAmphenol Connector Signal NameSignal Name Pin AssignmentsLED Indications IndicationColour Description2.5.8 IP-EXT16 Card KX-TDA0470 Accessories and User-supplied ItemsRJ45 Connector 10BASE-T/100BASE-TX Accessories included Ferrite core ×LED Indications IndicationColour Description2.6 Information about the Other Cards 2.6.1 OPB3 Card KX-TDA0190Accessories and User-supplied Items Accessories included none User-supplied not included none2.6.2 DPH4 Card KX-TDA0161 Accessories and User-supplied ItemsUser-supplied not included Copper wire FunctionSignal Name Signal NamePin Assignments 8-pin Terminal Block2.6.3 DPH2 Card KX-TDA0162 Accessories and User-supplied ItemsUser-supplied not included Copper wire FunctionProprietary Signal Name Standard Signal NameProprietary Signal Name Standard Signal NameConnection Diagram for German-type Doorphones and Door Openers 2.6.3 DPH2 Card KX-TDA0162OP2b OP2a2.6.4 EIO4 Card KX-TDA0164 Accessories and User-supplied ItemsUser-supplied not included Copper wire FunctionSignal Name Signal NamePin Assignments 8-pin Terminal BlockExternal Sensor Connection DiagramExternal Relay 2.6.5 ECHO16 Card KX-TDA0166 Accessories and User-supplied ItemsAccessories included Screws × User-supplied not included none Function2.6.6 MSG4 Card KX-TDA0191 Accessories and User-supplied ItemsAccessories included Screws × User-supplied not included none Function2.6.7 ESVM2 Card KX-TDA0192 and ESVM4 Card KX-TDA0194 Accessories and User-supplied ItemsAccessories included Screws × User-supplied not included none Function2.6.8 CTI-LINK Card KX-TDA0410 Accessories and User-supplied ItemsRJ45 Connector 10BASE-T Accessories included none User-supplied not included RJ45 connectorLED Indications IndicationColour Description2.7.1 Maximum Cabling Distances of the Extension Wiring Twisted Cable 2.7 Connection of ExtensionsPT-interface CS DSS Console2.7.1 Maximum Cabling Distances of the Extension Wiring Twisted Cable ü indicates that the extension card supports the terminalWith APT 2.7.2 Parallel Connection of the ExtensionsWith DPT Using a Modular T-Adaptor Using an EXtra Device PortWith KX-DT300 Series DPT except KX-DT321 2.7.2 Parallel Connection of the ExtensionsWith KX-T7600 Series DPT except KX-T7665 With Other DPT except KX-T7560 and KX-T75652.7.2 Parallel Connection of the Extensions TO TEL2.7.3 Digital EXtra Device Port Digital XDP Connection With KX-DT300 Series DPTUsing a Modular T-Adaptor Back View of DPTsBack View of DPTs Using an EXtra Device Port2.7.3 Digital EXtra Device Port Digital XDP Connection With KX-T7600 Series DPT except KX-T7600E Series Using a Modular T-AdaptorBack View of DPTs 2.7.3 Digital EXtra Device Port Digital XDP ConnectionBack View of DPTs Using an EXtra Device Port2.7.3 Digital EXtra Device Port Digital XDP Connection With KX-T7600E Series DPT Using a Modular T-AdaptorBack View of DPTs 2.7.3 Digital EXtra Device Port Digital XDP ConnectionUsing an EXtra Device Port Connecting to a Slave DPTBack View of DPTs 2.7.3 Digital EXtra Device Port Digital XDP ConnectionConnecting to a Master DPT To DLC8/DLC16 card To DHLC8 card for connection of SLTMaster DPT Back View of DPTsKX-DT343/KX-DT346 2.7.4 First Party Call Control CTI ConnectionKX-T7633/KX-T7636 RF Specification 2.8 Connection of DECT Portable Stations2.8.1 Overview Required Equipment and Maximum Number of CallsDescription Frequency BandNumber of Carriers Carrier Spacing2.8.2 Procedure Overview 1. Investigate the installation site2. Prepare for site survey 3. Conduct the site survey5. Connect the CS and PS to the PBX and test the operation 4. Finish the site survey6. Mount the CS on the wall Understanding Radio Waves 2.8.3 Site PlanningCharacteristics of Radio Waves Material ObjectTransmission Tendency Site Survey Preparation CS Coverage AreaRadio Signal Strength Levels CS installation plan Example Installing in a Room Separated by Interior WallsThings to take note of 2.8.4 Before Site Survey Checking the CS ID NumberAssigning the CS ID Number to the PS CS NoUsing the KX-TD7590 Press 1, 9, and POWER for more than 5 seconds To the initial displayPress 1, 9, and POWER for more than 2 seconds To the initial display CS NoDIP Switch Setting and Installing the CS Temporarily for Site SurveyKX-TDA0158CE DIP Switch OFF ONKX-TDA0141CE/KX-TDA0142CE For users in the United KingdomKX-TDA0158CEKX-TDA0141CE/KX-TDA0142CE 2.8.5 Site Survey Using the KX-TCA255/KX-TCA256/KX-TCA355/ KX-TD7590 Testing the Radio Signal StrengthUsing the KX-TCA255/KX-TCA256/KX-TCA355 Using the KX-TD7590PS CH0 L12 Radio Signal Strength LevelsPS CH0 L08 PS CH0 L03 Referring to the Stored Scan Data Using the KX-TCA255/KX-TCA256/KX-TCA355Channel No Log NoClearing the Stored Scan Data Using the KX-TD7590Using the KX-TCA255/KX-TCA256/KX-TCA355 Using the KX-TD7590KX-TDA0158CEKX-TDA0141CE/KX-TDA0142CE 2.8.6 After Site SurveyKX-TDA0158CEKX-TDA0141CE/KX-TDA0142CE 2.8.7 Connecting a Cell Station to the PBX Using a CSIF CardAccessories and User-supplied Items for the CS User-supplied not included RJ11 connectorUsing a DHLC/DLC Card Accessories and User-supplied Items for the CSAccessories included Screws × 2, Washers × User-supplied not included RJ45 connectorAccessories and User-supplied Items for the CS Accessories included Screws × 2, Washers ×User-supplied not included RJ11 connector KX-TDA0141CEConnecting the CS KX-TDA0158CEKX-TDA0141CE/KX-TDA0142CEKX-TDA0158CEKX-TDA0141CE/KX-TDA0142CE For the KX-TDA0142CE User onlyTo CSIF card Registering the PS 690 PS NoEntering the PBX System Programming Mode Using a PT Using the KX-TCA155/KX-TCA255/KX-TCA256/KX-TCA355Using the KX-TD7590 Using the KX-TD7580System Lock Password System Lock Password /OKSetting the Personal Identification Number PIN for PS Registration Setting the PIN for PBXUsing the KX-TCA155/KX-TCA255/KX-TCA256/KX-TCA355 Using the KX-TD7590Testing the Operation Using the KX-TCA155/KX-TCA255/KX-TCA256/KX-TCA355Using the KX-TD7590 Using the KX-TD75802.8.8 Wall Mounting Mounting the KX-TDA0158CEInstall a screw here 83 mm Install a screw here Reference for Wall Mounting KX-TDA0158CE2.8.8 Wall Mounting Mounting the KX-TDA0141CE/KX-TDA0142CE Washer Drive the screw to this pointReference for Wall Mounting KX-TDA0141CE/KX-TDA0142CE Install a screw here 71 mm Install a screw here2.9 Connection of 2.4 GHz Portable Stations 2.9.1 OverviewRequired Equipment and Maximum Number of Calls Required Distances between EquipmentInstallation Manual 2.9.1 Overview2.9.2 Procedure Overview 2. Prepare the CS for site survey1. Investigate the installation site Using the KX-TD7684/KX-TD76945. Connect the CS and PS to the PBX and test the operation 4. Finish the site survey6. Mount the CS on the wall 2.9.3 Site Planning Characteristics of Radio WavesUnderstanding Radio Waves ObjectMaterial ObjectTransmission Tendency CS Coverage Area Radio Signal Strength LevelsSite Survey Preparation CS installation plan Example Installing in a Room Separated by Interior WallsThings to take note of 2.9.4 Before Site Survey Setting and Installing the CS Temporarily for Site SurveyDIP Switch ON OFFOFF ON DIP SwitchKX-TDA0141/KX-TDA0142 KX-TDA0151/KX-TDA0152KX-TDA0141/KX-TDA0142 2.9.5 Site Survey Scan Data NoTesting the Radio Signal Strength Using the KX-TD7684/KX-TD7694PS CS NO.1 LEVEL12 Radio Signal Strength LevelsPS CS NO.1 LEVEL8 PS CS NO.1 LEVEL3 Using the KX-TD7680 Using the KX-TD7684/KX-TD7694Referring to the Stored Scan Data Deleting the Stored Scan Data Using the KX-TD7690Using the KX-TD7684/KX-TD7694 Using the KX-TD76802.9.6 After Site Survey KX-TDA0151/KX-TDA0152 KX-TDA0141/KX-TDA0142KX-TDA0151/KX-TDA0152 KX-TDA0141/KX-TDA0142 2.9.6 After Site Survey2.9.7 Connecting a Cell Station to the PBX Using a CSIF CardAccessories and User-supplied Items for the CS Accessories included Screws × 2, Washers ×Using a DHLC/DLC Card Accessories and User-supplied Items for the CSAccessories included Screws × 2, Washers × User-supplied not included RJ11 connectorKX-TDA0151/KX-TDA0152 KX-TDA0141/KX-TDA0142 Connecting the CSKX-TDA0151/KX-TDA0152 KX-TDA0141/KX-TDA0142 System Lock Password System Lock PasswordSystem Lock Password PT Administrator LevelWhen the PS has not been registered yet Using the KX-TD7684/KX-TD7694Using the KX-TD7680 Using the KX-TD7690System Lock Password System Lock PasswordSystem Lock Password Setting the System LockSetting the Personal Identification Number PIN for PS Registration Setting the PIN for PBXSetting the PIN for PS Using the KX-TD7684/KX-TD7694Testing the Operation Using the KX-TD7680Using the KX-TD7690 PS TerminationMounting the KX-TDA0151/KX-TDA0152 2.9.8 Wall MountingKX-TDA0151/KX-TDA0152 KX-TDA0151/KX-TDA0152 5. Hook the CS on the screw headsKX-TDA0151/KX-TDA0152 2.9.8 Wall MountingReference for Wall Mounting KX-TDA0151/KX-TDA0152 Install a screw here 83 mm Install a screw hereMounting the KX-TDA0141/KX-TDA0142 Reference for Wall Mounting KX-TDA0141/KX-TDA0142 Install a screw here 71 mm Install a screw here2.10 Connection of DECT 6.0 Portable Stations 2.10.1 OverviewNames and Locations of CS LED IndicationsRF Specification Radio Access MethodRequired Distances between Equipment Equipment2.10.2 Procedure Overview 1. Investigate the installation siteUsing the KX-TD7685/KX-TD7695 2. Prepare for site survey5. Connect the CS and PS to the PBX and test the operation 4. Finish the site survey6. Mount the CS on the wall 2.10.3 Site Planning Characteristics of Radio WavesUnderstanding Radio Waves 2.10.3 Site PlanningMaterial ObjectTransmission Tendency CS Coverage Area Radio Signal Strength LevelsSite Survey Preparation CS installation plan Example Installing in a Room Separated by Interior WallsThings to take note of 2.10.4 Before Site Survey Setting and Installing the CS Temporarily for Site SurveyUsing the KX-TD7685/KX-TD7695 Checking the CS ID NumberKX-TDA0155 DIP Switch2.10.4 Before Site Survey ON OFF DIP SwitchKX-TDA0158 KX-TDA0155 KX-TDA015845º 90º 45º At least 2 m 2.10.4 Before Site SurveyTesting the Radio Signal Strength 2.10.5 Site SurveyUsing the KX-TD7685/KX-TD7695 PS CH0 L12 Radio Signal Strength LevelsPS CH0 L08 PS CH0 L03 Channel no Using the KX-TD7685/KX-TD7695 Using the KX-TD7685/KX-TD7695Press 1, 9, and POWER for more than 2 seconds Press 1, 9, and POWER for more than 2 seconds2.10.6 After Site Survey KX-TDA0155KX-TDA0158KX-TDA0155KX-TDA0158 2.10.6 After Site Survey2.10.7 Connecting a Cell Station to the PBX Accessories and User-supplied Items for the CSAccessories included Screws × 2, Washers × User-supplied not included RJ11 connectorAccessories and User-supplied Items for the CS Accessories included Screws × 2, Washers ×User-supplied not included RJ45 connector KX-TDA0158KX-TDA0155KX-TDA0158 Connecting the CSKX-TDA0155KX-TDA0158 Setting the Personal Identification Number PIN for PS Registration PT Administrator LevelSetting the PIN for PBX Setting the PIN for PSPIN for PS Registration System Lock PasswordSystem Lock Password Using the KX-TD7685/KX-TD7695PS No Testing the OperationSystem Lock Password Using the KX-TD7685/KX-TD76952.10.8 Wall Mounting Mounting the KX-TDA0155/KX-TDA0158KX-TDA0155 KX-TDA0158KX-TDA0155 KX-TDA0158KX-TDA0155 KX-TDA0158Reference for Wall Mounting Install a screw hereInstall a screw here 100 mmMaximum Cabling Distance Installing the Doorphone KX-T30865/KX-T7765Note for KX-T7765 Users Cabinet Wall Connection 2.12.1 Connection of Peripherals 2.12 Connection of PeripheralsBGM/MOH Pager PC/Printer via RS-232CConnection Charts Signal NameFor connecting a printer/PC with a 25-pin RS-232C connector RS-232C SignalsSignal Ground SG Receive Data RXD…inputPC/CTI Server via USB version Pin Assignments2.13 Power Failure Connections 2.13.1 Power Failure ConnectionsUsing Analogue Trunk Card and Extension Card Accessories and User-supplied ItemsRJ11 Connector Pin Assignments for Extension Card Signal NameSignal Name Signal NameUsing BRI Card Accessories and User-supplied ItemsSwitch Settings RJ45 Connector LINE 1 Pin AssignmentsRJ45 Connector LINE 2 Pin Assignments Signal Name2.13.1 Power Failure Connections Level2.14 Starting the PBX System Initialisation Procedure2.14.1 Starting the PBX Confirming the Trunk Connection LED IndicationsIndication ColourSection 3 Guide for the Maintenance Console 3.1 Overview 3.1.1 Overview3.2 PC Connection 3.2.1 PC ConnectionSerial Interface Connection LAN Connection via CTI-LINK CardExternal Modem Connection 3.3 Installation of the Maintenance Console 3.3.1 Installing and Starting the Maintenance ConsolePassword Security System RequirementsPage 7. When country/area data do not match 6. a. Select KX-TDA100/200 from PBX Model3.3.1 Installing and Starting the Maintenance Console Installation ManualSection Troubleshooting 4.1 Troubleshooting 4.1.1 InstallationPROBLEM SOLUTION4.1.2 Connection SOLUTIONSOLUTION SOLUTIONSOLUTION CAUSE4.1.3 Operation PROBLEMSOLUTION PROBABLE CAUSESOLUTION PROBLEMPROBABLE CAUSE PROBLEM SOLUTIONPROBABLE CAUSE Poor connection4.1.4 Using the Reset Button Operation4.1.5 Troubleshooting by Error Log Error Log Display FormatExample Maintenance Console Example Station Message Detail Recording SMDRSub Code Error Message Log Information DescriptionSection 5 Appendix Installation ManualChanged Contents 5.1 Revision History5.1.1 PMPR Software File Version New Options5.1.2 PMPR Software File Version Changed ContentsNew Options 5.1.2 PMPR Software File VersionChanged Contents 5.1.3 PMPR Software File Version5.1.3 PMPR Software File Version 5.1.4 PMPR Software File Version Changed ContentsNew Options 5.1.4 PMPR Software File VersionNew Contents 5.1.5 PMPR Software File VersionChanged Contents New OptionsIndex Installation ManualNumerics IndexIndex Index Reference for Wall Mounting Analogue Public Switched Telephone Network PSTN of European countries Contact to Authorised Representative Panasonic Testing CentreONP 2048 kbit/s digital structured leased lines D2048S Panasonic Marketing Europe GmbHInstallation Manual For Future Reference