Panasonic KX-TDA100 installation manual Referring to the Stored Scan Data, Channel No, Log No

2.8.5Site Survey Using the KX-TCA255/KX-TCA256/KX-TCA355/KX-TD7590

b. Overlap the CS coverage areas of at least 2 CSs at any location in the installation site.

Channel no. 0 Channel no. 1

Channel no. 2 Channel no. 3

c.Make sure that the radio signal strength level is greater than "3" at any location in the service area required by the user.

Note

•If a channel is set, the results of measurement for the 24 slots on the channel are saved each time. If the same channel is set, the new results override the previous ones. Therefore, a measurement of 10 channels × 24 slots in total can be made.

•If correct results cannot be obtained (e.g., there are many frame errors), change the location of the CS and repeat the site survey to select the best location.

Referring to the Stored Scan Data

Using the KX-TCA255/KX-TCA256/KX-TCA355

1 9

Press 1, 9, and POWER for more than 2 seconds.

To go to other slots

A a /

Previous or Next

1	Log No.
	0 to 9

To go to specific channel

Channel No.

0 to 9

166

Installation Manual