Panasonic KX-TDA100 installation manual DIP Switch, Off On, KX-TDA0141CE/KX-TDA0142CE

2.8.4 Before Site Survey

KX-TDA0141CE/KX-TDA0142CE

DIP Switch

OFF ON

1

2

3

4

5

6

Channel Number Switch

Keep this switch at the default "OFF" position. Otherwise, the CS will not function.

Radio Signal

Test Switch

Channel 0	Channel 1	Channel 2	Channel 3	Channel 4	Channel 5	Channel 6	Channel 7	Channel 8	Channel 9
1	1	1	1	1	1	1	1	1	1
2	2	2	2	2	2	2	2	2	2
3	3	3	3	3	3	3	3	3	3
4	4	4	4	4	4	4	4	4	4

Note

If more than 1 CS is in Radio Signal Test mode, each CS must have a unique channel number.

4.After setting the DIP switches, connect the CS to an AC adaptor/battery box using a power supply adaptor.

WARNING

The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

Notice

•For users in the United Kingdom:

240 V AC must not be used on a building site. Instead of an AC adaptor, connect a battery box to the CS.

•If the Power Supply Select switch is set to ON in step 3, connect the CS to an AC adaptor/battery box. If it is set to OFF, connect the CS to a DLC/DHLC card (KX-TDA0158CE only).

162

Installation Manual