Panasonic KX-TDA100 Registering the PS, PS No, PS Registration, Administrator Level #

2.8.7 Connecting a Cell Station to the PBX

Registering the PS

The PS must be registered to the PBX before it can be used. Programming of both the PS and PBX is required. A PT with multiline display (e.g., KX-T7636 6-line display) is required to perform the PBX system programming.

Note

For details about system programming using a PT, refer to "2.3.2 PT Programming" in the Feature Guide, and "2.1 PT Programming" in the PT Programming Manual.

Entering the PBX System Programming Mode Using a PT

Administrator Level

#

PROGRAM/

PAUSE

System Password for Administrator—

for PT Programming

= 1234

Programming No.

3 digits

Note

means default value.

PS Registration

One PS can be registered to a maximum of 4 different PBXs.

[690] PS No.

001to 128

ENTER

Extn. No.	To the PS
	operation	END
1 to 4 digits	below
ENTER		(HOLD)

Using the KX-TCA155/KX-TCA255/KX-TCA256/KX-TCA355

Press POWER	Select	Select
for 2 seconds.	"Setting Handset".	"Registration".
		"Please wait".
Select	Select
"Register H/set".	"Base 1–4".
"Enter Base PIN".	PIN for PS Registration

C.Tone

4 digits

174

Installation Manual