Panasonic KX-TDA100 installation manual Connection

2.11.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays

Connection

Use 8-pin and 10-pin terminal blocks (included with the card) for connection.

1.While pressing down on the hole at the top of the terminal block using a screwdriver, insert the wire into the side hole as shown below. Repeat this procedure for other doorphones, door openers, external sensors, and external relays.

Refer to "2.6.2 DPH4 Card (KX-TDA0161)", "2.6.3 DPH2 Card (KX-TDA0162)",and "2.6.4 EIO4 Card (KX-TDA0164)"for pin assignments.

Doorphone

Door Opener

External Sensor/

External Relay Device

2.Attach the terminal blocks to the connectors of the DPH4/DPH2/EIO4 card on the PBX.

To doorphones/

door openers/

external sensors/

external relays

240

Installation Manual