Panasonic installation manual Wall Mounting KX-TDA100

2.2.12 Wall Mounting (KX-TDA100)

2.2.12 Wall Mounting (KX-TDA100)

WARNING

•Make sure that the wall the shelf will be attached to is capable of supporting at least 4 times the weight of the shelf.

•Only use the wall-mounting equipment (anchor plugs, screws, metal bracket) included with the PBX.

CAUTION

•When placing the metal bracket, make sure that the "TOP" arrow is pointing upward.

•Do not block the openings of the shelf. Allow space of at least 20 cm above and 10 cm at the sides of the shelf.

•Make sure that the surface behind the shelf is flat and free of obstacles, so that the openings on the back of the shelf will not be blocked.

•Make sure that the surface behind the shelf is not made of wood.

Notice

•When driving the screws into the wall, be careful to avoid touching any metal laths, wire laths or metal plates in the wall.

•When this product is no longer in use, make sure to detach it from the wall.

•Be careful not to drop the shelf.

1.Install 3 anchor plugs in the wall, using the metal bracket as a template. Fix the metal bracket with 3 screws

(A).

Metal Bracket

Screw (A)

Anchor Plug

Wall

TOP

TOP

Hammer Anchor Plug

8 mm

30 mm

Screw (A)

Metal Bracket

Installation Manual

67