Panasonic KX-TDA100 Before Site Survey, Checking the CS ID Number, CS No, To enter letters

2.10.4 Before Site Survey

2.10.4 Before Site Survey

Use the KX-TD7685/KX-TD7695 PS to conduct the site survey.

Note

Display prompts for the site survey are only available in English.

Checking the CS ID Number

Check the CS ID number label attached to the CS. If the CS ID number label is not attached to the CS, check the CS ID number using the Maintenance Console. For details, refer to "2.6.14 Utility—CS Information" in the PC Programming Manual.

Assigning the CS ID Number to the PS

Using the KX-TD7685/KX-TD7695

1 9 ABC 2

Press 1, 9, and POWER for more than 2 seconds.

To the initial display

To enter letters
A:	+	0	C:	+ ABC 2
B:	+	1	D:	+ DEF 3

CS No.					CS ID No.
	0 to 7			0 to 9 and A to F
		To the Desir	ed CS No.

E:

F:

+GHI

+JKL

4 5

Note

To clear the CS ID number assigned to the PS, follow the procedure below:

1 9 DEF 3

Press 1, 9, and POWER for more than 2 seconds.

To the initial display

To clear one by one

CS No.

0 to 7

To the Desired CS No.

OR

To clear all at once

#

Setting and Installing the CS Temporarily for Site Survey

1.Switch the Radio Signal Test switch from OFF to ON.

2.Set the channel number switches as desired.

3.Set the Power Supply Select switch as desired.

Installation Manual

219