11
How to Sight-In USING A BORE-SIGHTING COLLIMATOR
To save time and ammunition, start out in your shop or gun room with a
bore-sighting collimator. Follow the directions included with the collimator for
specific instructions on its proper use. Remember, when possible, it is better
to make the initial windage adjustments to the mount base before using the
scope’s windage adjustment.
NOTE: Bore-sighting alone is not sufficient to sight-in a scope. You must make final
adjustments by shooting the firearm using the same ammunition you use in the field.
USING THE LEUPOLD ZERO POINT
ILLUMINATED MAGNETIC BORESIGHTER
This tool fits any rifle, shotgun, or pistol, and helps you get “on the paper”
fast, without barrel spuds. It works with any optical sight, and can even be
used to recheck your zero, without firing a shot. See your Leupold Golden Ring
Dealer or visit www.leupold.com for more information.