31
1. Turn the focus ring counterclockwise (when viewing though the eyepiece)
until it stops.
2. Turn the focus ring clockwise until the “10m” mark aligns with the indicator
mark on the bell of the scope.
3. From this point, all readings of the focus ring are in numerical order
when the ring is turned clockwise from the shooting position.
4. Adjust the ring as you would a standard adjustable objective model.
INSTALLING A LENS ATTACHMENT
Many Leupold scopes offer threaded objective and eyepiece rings to allow
for the attachment of lens covers and a variety of Alumina® accessories. These
attachments thread directly into the objective or eyepiece rings. Turn until
finger tight – do not over tighten.