Panasonic KX-TDA100 Accessories and User-supplied Items for the CS, KX-TDA0141CE

2.8.7 Connecting a Cell Station to the PBX

Note

•The no. 4 and no. 5 pins (Master) of the CS must be connected to a pair of pins on the DHLC/DLC card. Then use 4 consecutive pairs of pins on the DHLC/DLC card, starting with the pins corresponding to the Master, as in the example above.

•When connecting multiple KX-TDA0158CE CSs to a DHLC/DLC card, make sure that the no. 4 and no. 5 pins (Master) of adjacent CSs are at least 3 pairs of pins away on the card.

•CS connections must be made within the same DHLC/DLC card.

•When a wrong connection is made, satisfactory performance of the CS cannot be guaranteed. Check the connection of CS and the PBX using the Maintenance Console. For information about how to view CS information using the Maintenance Console, refer to "2.6.14 Utility—CS Information" in the PC Programming Manual.

KX-TDA0141CE

DHLC8 Card

Cable	Maximum Distance
ø 0.4 mm:	222 m
ø 0.5 mm:	347 m
ø 0.6 mm:	500 m
CAT 5:	347 m

CS (RJ11)

Signal Name	Pin No.
D1	1
	2
	3
D2	4

DHLC/DLC card

(Amphenol)

Signal Name

D1

D2

Accessories and User-supplied Items for the CS

Accessories (included): Screws × 2, Washers × 2

User-supplied (not included): RJ11 connector

Note

For details about DHLC card or DLC card, refer to "2.5.2 DHLC8 Card (KX-TDA0170)", "2.5.3 DLC8 Card (KX-TDA0171)",or "2.5.4 DLC16 Card (KX-TDA0172)".

Installation Manual

171