Panasonic KX-TDA100 installation manual Installing/Removing the Optional Service Cards

2.2.7 Installing/Removing the Optional Service Cards

2.2.7 Installing/Removing the Optional Service Cards

CAUTION

To protect the back board from static electricity, do not touch parts on the back board in the main unit and on the optional service cards. To discharge static electricity, touch ground or wear an earthing strap.

Note

The optional service cards can be installed or removed while the DC power is supplied. However, when installing or removing the MPR card, the DC power supply must be turned off.

Installing Optional Service Cards

1.Insert the card along the guide rails.

Guide Rail

2.Holding the card as shown below, push the release lever in the direction of the arrow so that the card engages securely with the connector on the back board.

Back Board

Release Lever

Installation Manual

53