6Setup and Reset
6.5Key Repeat Time
Control the response rate of a button when the button is pressed.
The functions available on the monitor may vary depending on the model. Refer to the actual product.
6.5.1 Configuring Key Repeat Time
1When the Function Key Guide appears, select [
] by moving the JOG button UP. Next, press the JOG button.
2Move to SETUP&RESET controlling the JOG button UP/DOWN and press the JOG button.
3Move to Key Repeat Time controlling the JOG button UP/DOWN and press the JOG button. The following screen will appear.
SETUP&RESET
Reset All
Eco Saving |
| Off | |
Off Timer |
|
|
|
|
|
| |
| Acceleration |
| |
PC/AV Mode |
|
| |
| 1 sec | ||
|
| ||
Key Repeat Time |
| Acceleration | |
|
| 2 sec | |
Source Detection |
| Auto | |
Power LED On |
| No Repeat | |
|
|
| |
Configure the response rate of a button when the button is pressed.
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is pressed.
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
6 Setup and Reset 63