Attaching the Stand (S27HG50QQ* model only)
――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
1 | 2 | 3 | 4 | 5 |
Place the protective Styrofoam (cushion) included in the package on the floor and place the product facing down on the Styrofoam, as shown in the image. If Styrofoam is unavailable, use a thick sitting mat.
Insert the stand neck into the monitor in the direction shown in the figure.
――Keep the stand base within the platform to prevent it falling off and causing injury.
Attach the stand neck to the monitor, and then fasten the 4 screws on the base to tightly fix it.
Attaching the
Turn the
While pressing down with one hand on the lower styrofoam layer, lift the stand's neck with the other hand.
6 | 7 |
Insert the stand base into the stand neck in the direction shown in the figure.
――Keep the stand base within the platform to prevent it falling off and causing injury.
Install the stand base and tighten the screws at the bottom of the stand base.
――Keep the stand base within the platform to prevent it falling off and causing injury.
Caution
Do not press down on the monitor. There is a risk of damaging the monitor.
18
