Samsung LS46BPTNS/XSJ manual Signal Balance, Signal Control, 169, Sharpness, Color, Tint, Dynamic

This is used to make up for the weak RGB signal transmitted by a long signal cable.

(Available in PC, BNC mode only)

1)Signal Balance

[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [ENTER] → [∧ / ∨] → [ENTER] Selects either On or Off with the signal control.

2)Signal Control

[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [< / >] → [ENTER]

Adjusts the Gain and Sharpness manually.

Size

[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] The Size can be switched.

1)16:9

2)4:3

PIP Picture

[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [< / >] → [ENTER]

Adjusts the PIP Screen Settings.

1)Contrast

Adjusts the Contrast of the PIP window on the screen.

2)Brightness

Adjusts the Brightness of the PIP window on the screen.

3)Sharpness

Adjusts the difference between the lightest and darkest areas of the PIP window.

4)Color

Adjusts the Color of the PIP window on the screen.

5)Tint

Adds a natural tone to the PIP window.

You can view a picture from AV, S-Video through the PIP screen in PC, BNC and DVI mode. Operates only if the video signal is NTSC.

Available Modes: PIP ON

Picture [ AV / S-Video / Component / HDMI Mode]

Available Modes

PC / BNC / DVI

AV

S-Video

Component

HDMI

MagicNet

Mode

[MENU] → [∧ / ∨] → [ENTER] → [ENTER] → [∧ / ∨] → [ENTER]

The LCD Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are preset at the factory.

Dynamic, Standard, Movie, or Custom can be activated.

1) Dynamic