Basic Features

Picture Options

Menu → Picture → Picture Options

Using this function, you can configure additional picture settings to suit your preference. ✎✎When connecting a PC, you can only make changes to Colour Tone.

Picture Options

Colour Tone

Standard

Digital Clean View

Auto

MPEG Noise Filter

Auto

HDMI Black Level

Low

Film Mode

Off

•• Colour Tone (Cool / Standard / Warm1 / Warm2)

✎✎Warm1 or Warm2 will be deactivated when the picture mode is Dynamic.

✎✎Settings can be adjusted and stored for each external device connected to an input on the LED display.

•• Digital Clean View (Off / Low / Medium / High / Auto / Auto Visualisation): If the broadcast signal received by your LED display is weak, you can activate the Digital Clean View feature to reduce any static and ghosting that may appear on the screen.

✎✎When the signal is weak, try other options until the best picture is displayed. Auto Visualisation: When changing analogue channels, displays signal strength. ✎✎Only available for analogue channels.

✎✎When bar is green, you are receiving the best possible signal.

•• MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality.

•• HDMI Black Level (Low / Normal): Selects the black level on the screen to adjust the screen depth. ✎✎Available only in HDMI mode (RGB signals).

•• Film Mode (Off / Auto1 / Auto2): Sets the LED display to automatically sense and process film signals from all sources and adjust the picture for optimum quality.

✎✎Available in TV mode, HDMI (1080i), EXT.

✎✎If the screen does not seem natural, change its option to Off / Auto1 / Auto2 in Film Mode.

English - 35