Other Information
Issues | Solutions and Explanations |
Others |
|
Purple/green rolling horizontal | Remove the left and right audio connections from the |
bars and buzzing noise from | stops, this indicates that the |
the product speakers with a | Component video cables with an HDMI connection. |
Component cable connection. |
|
The picture won’t display in | HD channels will have black bars on either side of the screen when displaying up |
full screen. | scaled SD (4:3) contents. |
| Black bars will appear on the top and bottom of the screen when you watch movies |
| that have aspect ratios different from your product. |
| Adjust the picture size options on your external device or the product to full screen. |
A Mode Not Supported | Check the supported resolution of the product, and adjust the external device’s output |
message appears. | resolution accordingly. Refer to the resolution settings of this manual. |
There is a plastic smell from | This smell is normal and will dissipate over time. |
the product. |
|
The product Signal | This function is only available for digital channels the product receives from an Aerial / |
Information is unavailable in | RF /Coax connection. |
the Self Diagnosis menu. |
|
The product is tilted to the | Remove the base stand from the product and reassemble it. |
side. |
|
The channel menu is grayed | The Channel menu is only available when you select the product source. |
out (unavailable). |
|
Your settings are lost after | If the product is in the Store Demo mode, it will reset audio and picture settings every |
5 minutes or every time the | 5 minutes. Change the settings from Store Demo mode to Home Use mode using |
product is turned off. | the Setup procedure. Select TV in the Source using your remote, and go to Menu → |
| System → Setup. |
English - 73