Other Information
Issues | Solutions and Explanations |
|
|
The PIP menu is not available. | • PIP functionality is only available when you are using a HDMI source. |
|
|
You turned the LED display off 45 minutes | • It is normal. The LED display operates the OTA (Over The Aerial) function itself to upgrade firmware |
ago, and it turned on again. | downloaded whilst your watching LED display. |
|
|
The message “Scramble signal” or “Weak | • If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot. |
Signal/No Signal” appears. | • If there is still a problem, pull the CAM CARD out of the LED display and insert it into the slot again. |
|
|
There are recurrent picture/sound issues. | • Check and change the signal/source. |
|
|
A reaction may occur between the rubber | • To prevent this, use felt pads on any surface of the LED display that comes in direct contact with |
cushion pads on the base stand and the | furniture. |
top finish of some furniture. |
|
|
|
✎✎This panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
¦¦ Storage and Maintenance
✎✎If you attched some stickers on the LED display screen, it remains some debris after removing the sticker. Please clean it to watch LED display.
✎✎The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using the cloth provided or a soft cloth to prevent scratches.
Do not spray water or a cleaning agent directly onto the product. Any liquid that goes into the product may cause a failure, fire, or electric shock.
Clean the product with a soft cloth dapped in a small amount of water.
[[CAUTION
If the height of " A adjust the heights.
" on one side is different from the other side,
English 43