Preference Features

Using the Sleep Timer

MENU → System → Time → Sleep Timer → ENTERE

•• Sleep Timer: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes)

✎✎Use the ▲/▼ buttons to select a period of time, and then press ENTERE. To cancel the Sleep Timer, select Off.

Setting the On / Off Timer

MENU → System → Time → On Timer <or> Off Timer → ENTERE

•• On Timer: You can set up three separate On Timer configurations. (On Timer 1, On Timer 2, On Timer 3)

Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select Manual, you can set up the day you want to activate the timer.

The c mark indicates the day you’ve selected. Time: Set the hour and minute.

Volume: Set the desired volume level.

Source: To select the source of the content that will play when the TV turns on. You can:

––Select TV and have the TV display a specific air or cable channel.

––Select USB and have the TV play back photo or audio files from a USB device.

––Select a source on your TV (HDMI1, HDMI2/DVI, AV, Component, etc.) that you have connected a set-top box to, and have the TV display a channel from the set-top box.

✎✎The USB device must be connected to your TV before you can select USB. ✎✎If you select a source other than TV or USB, you must:

•• Have a cable or satellite set-top box attached to that source

•• Set the set-top box to the channel you want to watch when the TV goes on

•• Leave the set-top box turned on.

English - 53