16
Adjusting Your LCD TV

Setting the Channel

Main Menu Sub-Menus Function Descriptions
Selecting the Video Signal Source
Before begin memorizing the available channels,
you must specify the type of signal source that is
connected to the your LCD TV.
Press the
-
or
+
button to select Ant(antenna) or CATV
(cable system).
Channel auto program does not work when the V-Chip function is active.
Memorizing the Channels Automatically
Your LCD TV can memorize and store all of the available
channels found automatically for both off-air
(antenna) and cable channels.
Press the
-
or
+
button, and then begin memorizing all
of the available channels with the horizontal bar is
displayed.
Fine tuning Channel Reception
If the reception is clear, you do not have to fine-tune
the channel, as this is done automatically during the
memorize and store operation.
If however the signal is weak or distorted, you may
have to fine-tune the channel.
Skipping Unwanted Channels
You can exclude the channels of your choice from the
channel scan operation. when you scan through the
stored channels, those you have chosen to skip are not
displayed. All channels that you do not specifically
choose to skip are displayed during scanning.
You can do easily by pressing the ADD/ERASEbutton on the remote control.
continued...
Channel
Move Select Exit
Ant/CATV Ant
Auto Program
Fine Tune 00
Add/Erase : Erased
LNA : Off
Channel
Move Adjust Exit
Ant/CATV Ant
Auto Program
Fine Tune 00
Add/Erase : Erased
LNA : Off
Channel
Move Select Exit
Ant/CATV Ant
Auto Program
Fine Tune 00
Add/Erase : Erased
LNA : Off
Channel
Move Select Exit
Ant/CATV Ant
Auto Program
Fine Tune 00
Add/Erase : Erased
LNA : Off