Installation

Attaching the Stand

――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ――The exterior may differ depending on the product.

1

Insert the stand neck into the stand base in the

4

direction shown in the figure.

 

 

2

Check that the stand neck is firmly connected.

5

 

3

Tightly fasten the connecting screw at the bottom of

the stand base.

 

Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards.

Hold the main body of the product with your hand as shown by the figure. Push the assembled stand into the main body in the direction of the arrow as shown in the figure.

-Caution

Do not hold the product upside down only by the stand.

17