Removing the Stand
――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ――The exterior may differ depending on the product.
1 | Place a soft cloth over the table to protect the product | 4 | |
and place the product onto the cloth so that the front | |||
|
|
of the product is facing downwards.
2 | To disassemble the stand from the monitor, make sure | |
to press the lower part of the monitor with one hand, | ||
| ||
| and pull and sway sideways the stand with the other | |
| hand, as shown in the picture. |
3 | Turn the connecting screw at the bottom of the stand | |
base to separate it. | ||
|
Remove the stand neck from the stand base by pulling it in the direction of the arrow as shown in the figure.
18