5-4 Manual
Using the Battery
Please refer to the following instructions when running the computer on
battery power without connecting the AC power.
This computer uses smart rechargeable Lithium-Ion (Li-Ion) battery.

Ejecting and Attaching Battery

1. Shutdown system and close LCD.
2. Put the computer upside down.
3. Pull the two battery latches outward
( ),
then remove the battery.
4. To install the battery again, slide the battery into the system as below. The battery
latch moves inward, and fixes the battery automatically.
CC
CCaa
aauu
uutt
ttii
iioo
oonn
nn
Precautions
󳀏Use only chargers specified in the User Manual.
󳀏Never heat the battery pack, put it near or in a fire or use at a temperature higher
than 60°C, as this may cause fire.
󳀏Never cause a short circuit between the battery pack terminals or disassemble the
battery pack.
󳀏Carefully read and follow the precautions printed on the battery and the safety
instructions in the User Manual before using the battery.
󳀏Please read the instructions on the battery before use.
󳀏Please refer to the system operation environment (Page A-2) of this manual and
operate and store the battery at room temperature.
battery latch
