Samsung M55 manual Display Related, Q1 The LCD screen is too dark or too bright

Display Related

Q1 The LCD screen is too dark or too bright.

ATurn on the LCD backlight or adjust the screen brightness. Press <Fn>+<F5> to

turn on the LCD backlight or press <Fn>+< >, <Fn>+< > to adjust the screen brightness.

Q2 The screen saver disturbs screen viewing during Media Player or video file operation.

AUnselect Tools > Option > Player > Allow screen saver during playback in the Media Player.

Q3 In DOS mode, changing the full screen DOS mode by pressing <ALT>+<Enter> key displays a broken image for a short period.

AThe DOS mode which supports 2 Byte characters such as Korean and Japanese runs in graphic not in text mode. In this case, a broken image may be displayed while changing the video mode settings.

Q4 In the following cases, the screen blinks or displays noise for a short time.

(Click the Graphics Related tab, Change Resolution, Change Display Device, Remove the AC Adapter, Restart the System, Change PowerMizer level.)

AThis may happen while the video driver is examining the connected device. While detecting, any connected display devices may blink or some noise may occur.

Q5 When I connect a projector, and change the setting to display screen image on both the LCD and the projector by pressing <Fn>+< > keys, screen is not displayed properly.

APress <Fn>+< > keys once again.

If the same problem continues, it means the projector cannot support the resolu- tion. Lower the resolution to 1024 x 768.

Q6 The desktop momentarily appears as a broken image when zooming in or out of the Media Player screen when Media Player is running.

ASince zooming in or out of the Media Player screen changes the screen resolu- tion, the desktop may momentarily appear as a 'broken image' during this oper- ation.

Chapter 7. Recovering the Computer 7-11