Q7 The playback screen of a DVD title or an MPEG file is only dis- played on the LCD.

AVideo is displayed on a single display device by default, when LCD and CRT are selected simultaneously.

1.Right-click over the Desktop and select Properties from the pop-up menu.

2.In the [Display Properties] window, select the Settings tab > Advanced > GeForce Go xxxx tab.

3.Select the Full Screen Video menu> Full Screen Video Control item, set the Full Screen Device to ‘Auxiliary Display’ and then click the Apply button. Then you can view video on both the LCD and CRT display devices.

Q8 After connecting to a TV, some programs such as Debug, Mem, etc. do not run in full screen MS-DOS mode.

AIf a TV is used as the display device, some programs such as Debug, Mem, etc. may not run properly in full screen MS-DOS mode. Run the programs in the MS- DOS window.

Q9 The Taskbar on the bottom of the screen does not appear when a projector is used as the display device.

AThis may happen, because while WXGA+ and WSXGA+ LCD support 1440x900 and 1680x1050 modes respectively, the projector does not support these modes. In this case change the resolution to 1024x768 (recommended) on your computer.

Q10 Switching the MS-DOS command prompt to full screen mode or Windows mode by pressing the <Alt>+<Enter> keys does not operate properly.

APressing the <Alt>+<Enter> keys using an USB keyboard, may cause the key input to be recognized as multiple key inputs depending on the keyboard input recognition time. In this case, the MS-DOS command prompt is repeatedly switched to full screen and then to Windows several times. Please press the <Alt>+<Enter> keys more quickly, or press the <Alt>+<Enter> keys using the sys- tem keyboard.

7-12Manual

Page 136
Image 136
Samsung M55 manual 12Manual