Samsung MAX-C570Q/XFO manual Listening to a Cassette, CD Synchro Record Feature, Tape Counter

Listening to a Cassette

GB

Always treat your cassettes with care; refer, if necessary, to

the section entitled “Precautions When Using Audio Cassettes”

	on page 24.
1	Switch the system on by pressing the STANDBY/ON button.
2	Select the TAPE function by pressing TAPE on the front panel.
3	Open either cassette deck 1 or 2 by pushing and releasing the deck
4	cover where PUSHE JECT (		) is written.
	Insert the pre-recorded cassette with the open edge of the tape
	facing downward.
5	Close the deck by pushing on it until it clicks into place.
	Result: Depending on the deck selected, the 1 or 2 indication is
	displayed in front of the counter number.
6	If you have inserted two cassettes, press TAPE 1/2 on the front panel
	or directly the DECK 1/2 button on the remote control to select the
	cassette to be played.
	Result: Depending on the deck selected, the TAPE 1 or TAPE 2
	indication is displayed.
7
	To listen to...	Press ...
	Side A,B	TAPE ( )
	Result: The cassette starts playing.
8	When the cassette is stopped, select one of the following functions
	as required or on the remote control.
	Main Unit
	To...		Press...
	Rewind the cassette
	Fast-forward the cassette
	Remote Control
	To...		Press ...
	Rewind the cassette
9	Fast-forward the cassette
	To...		Press ...

Stop the playback

1
2,7
8	8
COUNT	9
RESET
6
18

CD Synchro Record Feature

(This function is not available during playback of an MP3-CD.)

You can record a compact disc on a cassette in two different ways:

Synchronised recording

Direct recording

This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.

1	Switch the system on by pressing STANDBY/ON.
2	Insert a blank cassette in Deck 2.
3	Select the CD function by pressing CD/MP3-CDon the front panel.
4	Load a compact disc.
5	Select the required disc.
6	Select the required track and press CD SYNCHRO or press CD
	SYNCHRO directly to start recording at the beginning of the disc.

Result: REC and CD SYNC are displayed and recording starts.

7 To stop recording, press .
3
1
	7
COUNT	6
RESET

Recording a Compact Disc

The direct recording mode enables you to start recording with any track on the compact disc.

You can only record on cassettes in Deck 2.

You do not need to adjust the volume, as it has no effect on the recording.

1	Switch your system on by pressing STANDBY/ON.
2	Insert a blank cassette in Deck 2.
3	Select the CD function by pressing CD/MP3-CDon the front panel.
4	Load the compact disc.
5	Select the required disc.
6	Select the required track on the compact disc and press		on the front
	panel or	on the remote control to set the compact disc player to Pause
7	mode.
	Press the REC/PAUSE.
	Result: REC is displayed.

8 Press the to start playing the track. Result: The track is recorded on the cassette.

9 To stop recording, press .

1	3,6,8
7	9
	COUNT
	RESET

Recording a Radio Program

You can record a radio program of your choice.

You can only record on cassettes in Deck 2.

You do not need to adjust the volume, as it has no effect on the recording.

1	Switch the system on by pressing STANDBY/ON.
2	Insert a blank cassette in Deck 2.
3	Select the TUNER function by pressing TUNER.
4	Select the radio station that you wish to record by pressing TUNING
	or	on the remote control or by press the DOWN or UP on
	the front panel.
5	Press REC/PAUSE.
	Result: REC is displayed in red and recording starts.

6 To stop recording, press .
3
1
	6
COUNT
RESET
5	4
4

Copying a Cassette (Dubbing)

You can copy a cassette from Deck 1 to Deck 2.

Normal speed dubbing in selecting Tape function mode.

You do not need to adjust the volume, as it has no effect on the recording.

Take care not to insert the tape to be copied in Deck 2, as it will be erased when you start recording.

1	Switch your system on by pressing STANDBY/ON.
2	Insert a blank cassette in Deck 2.
3	Insert the tape to be copied in Deck 1.
4
	To copy a cassette at...	Press...

Normal speed DUBBING

Result: The appropriate indications are displayed and the cassette in Deck 1 is copied to the cassette in Deck 2.

5 To stop dubbing, press .

1

5

COUNT

RESET

4

Tape Counter

GB

When playing a cassette in one of the cassette decks, a counter is displayed to enable you to take note of the counter value at the start of each track to start playback at the beginning of the track to which you wish to listen.

Before starting to record a cassette for which you wish to take note of the counter values at the beginning of each track, reset the counter by pressing COUNTER RESET .

Each cassette deck has a separate counter.

COUNT

RESET

19