Where to Install Your Mini-Com- pact System

Inserting Remote Control Batteries

Connecting to an External Source

Connecting the AM (MW) Aerial

GB

To take full advantage of your new mini-compact system, follow these installation instructions before connecting the unit.

Install the system on a flat, stable surface.

Insert or replace remote control batteries when you:

Purchase the mini-compact system

Find that the remote control is no longer operating correctly

The auxiliary input can be used to take advantage of the sound quality of your mini-compact system when listening to other sources.

Examples: A television

GB

The AM aerial (for long and medium waves) can be:

Placed on a stable surface

Fixed to the wall (you must first remove the base)

The AM aerial connector terminals are located on the rear of the system

Never place this unit on carpeting.

Never place this unit in an outdoor area.

Maintain an open space of approximately 6 inches (15 cm) on the sides and rear of the system, for ventilation purposes.

Make sure that you have enough room to open the compact disc compartment easily.

Place the loudspeakers at a reasonable distance on either side of the system to ensure good stereo sound.

Direct the loudspeakers towards the listening area.

For optimum performance, make sure that both speakers are placed at an equal distance above the floor.

Connecting your System to the Power Supply

The main lead must be plugged into an appropriate socket.

Before plugging your system into a main socket, you must check the voltage.

1 Plug the main lead (AC cord on the rear of the system) into an appropriate socket.

2 Press the STANDBY/ON button to switch your mini-compact system on.

When replacing the batteries, use a new set of batteries and never mix alkaline and manganese batteries.

1 Place your thumb on the position marked on the battery compartment cover (rear of the remote control) and push the cover in the direction of the arrow.

2 Insert two AAA, LR03 or equivalent batteries, taking care to respect the polarities:

+ on the battery against + in the battery compartment

on the battery against – in the battery compartment

3 Replace the cover by sliding it back until it clicks into position.

If you will not be using the remote control for a long time, remove the batteries to prevent corrosion.

Connecting the Loudspeakers

The loudspeaker connector terminals are located on the rear of the system.

There are four terminals on the system:

Two for the left speaker (marked L)

Two for the right speaker (marked R)

To achieve the correct sound quality, connect the:

Red wire to the + terminals

Black wire to the – terminals

1 Press and hold the terminal tab.

A video disc player

A Hi-Fi stereo video cassette recorder

To connect to the external source, the source must have an audio output. In addition, you need an RCA connection cable.

1 Set the system to standby mode and disconnect it and the external source from the main socket.

2 Connect the audio cable to the rear of the mini-compact system.

Connect the...

To the connector marked...

Red jack

R (right)

White jack

L (left)

 

For optimum sound quality, do not invert the right and left

 

channels.

 

3

Plug the system back into the main socket and press

 

STANDBY/ON to switch it on.

4

Select the AUX source by pressing AUX.

 

Result: AUX is displayed.

5

Switch the external source on.

6

Adjust the volume and balance as required:

 

Volume

Equalizer

Example: You can watch a film and take advantage of stereo sound provided that the original sound track is in stereo (as if you were in a cinema).

and are marked AM .

To avoid noise interference, check that the loudspeaker wires do not run close to the aerial wires.

Always keep them at least 2 inches (5 cm) away.

Connecting the FM Aerial

How to connect a COAXIAL TYPE aerial.

Connect a 75antenna to the FM antenna terminal.

Plug the connector on the FM aerial supplied into the coaxial socket (75) marked FM on the rear of the system.

Follow the instructions given on Page 14 to tune into a radio station, and determine the best position for the aerial.

If reception is poor, you may need to install an outdoor aerial.

To do so, connect an outdoor FM aerial to the FM socket on the rear of the system using a 75coaxial cable (not supplied).

2

Insert the speaker cord.

3

Release the finger.

 

L

 

R

6

 

3

4

7

Page 4
Image 4
Samsung MAX-C570Q/XFO Connecting your System to the Power Supply, Connecting the Loudspeakers, Connecting the FM Aerial

MAX-C570Q/XFO, MAX-C550R/EDC, MAX-C550Q/XFO, MAX-C570R/ELS, MAX-C550R/ELS specifications

The Samsung MAX-C570R/EDC, MAX-C550R/ELS, MAX-C570R/ELS, MAX-C550Q/XFO, and MAX-C550R/EDC represent a series of advanced multifunctional printers designed to meet the diverse needs of modern businesses. These devices are not only efficient but also incorporate cutting-edge technologies that enhance productivity and user experience.

One of the standout features of these printers is their high print resolution, delivering crisp and clear output, making them ideal for high-quality documents, brochures, and presentations. With print speeds ranging from 35 to 57 pages per minute, the MAX series is engineered to handle large volume printing without compromising quality. This capability is essential for busy offices that require fast turnaround on essential documents.

In terms of connectivity, these printers are equipped with various options, including USB, Ethernet, and wireless connectivity. This ensures seamless integration into existing office networks, allowing multiple users to share the printer with ease. Furthermore, features like mobile printing support make it possible to print directly from smartphones and tablets, adding convenience for users on the go.

Another key technology incorporated in the MAX series is Samsung’s Easy Print Manager, which simplifies print management tasks. This intuitive software allows users to monitor printer status, manage print jobs, and access advanced settings, all from a user-friendly interface. Additionally, the printers support automatic duplex printing, contributing to environmentally friendly operations by reducing paper consumption.

Security features are also a top priority in the MAX series. With built-in secure printing options and advanced authentication protocols, organizations can ensure that sensitive documents are protected from unauthorized access and potential breaches. This is particularly important for industries that handle confidential client or corporate information.

Enhanced durability is a notable characteristic of the MAX-C570R/EDC, MAX-C550R/ELS, MAX-C570R/ELS, MAX-C550Q/XFO, and MAX-C550R/EDC printers, designed to withstand the rigors of a busy office environment. Their robust build quality not only ensures longevity but also minimizes downtime, allowing businesses to maintain productivity levels.

Overall, the Samsung MAX series printers combine performance, efficiency, and innovation, making them a reliable choice for companies seeking to optimize their printing tasks while ensuring quality and security in their document solutions.