Samsung MAX-C550Q/XFO Setting the Clock, Loading and Changing Compact Discs, To play Press

DEMO/DIMMER function

GB

All functions available on the system can be viewed on the display and the display's brightness can be switched between "on" and "off".

1	Press the DEMO/DIMMER button.
	Result: All functions available on the system appear on the front
	panel display.
	Each of these are explained in detail in this guide.
	Please refer to the relevant section.
2	Press the DEMO/DIMMER button again.
	Result: The Dimmer function is selected and the display darkens.
3	Press the DEMO/DIMMER button once again to brighten the front
	panel display.

A display brightness control can only be performed while the system power is on.

Setting the Clock

Your system is equipped with a clock which allows you to turn your system on and off automatically. You should set the clock:

When you purchase the mini-compact system

After a power failure

After unplugging the unit

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1	Switch the system on by pressing STANDBY/ON.
2	Press TIMER/CLOCK twice.
	Result: CLOCK is displayed.
3	Press ENTER.
	Result: The hour flashes.
4	To...	Press the...
	Increase the hours
	Decrease the hours
5	When the correct hour is displayed, press ENTER.
	Result: The minutes flash.
6	To...	Press the...
	Increase the minutes
	Decrease the minutes

7 When the correct time is displayed, press ENTER.

Result: The clock starts and is displayed, even when the system is in standby mode.

You can display the time, even when you are using another function, by pressing TIMER/CLOCK once.

You can also use TUNING/ALBUM / on the remote con-

trol to instead of / buttons in step 4, 6.

1
4,6	4,6
COUNT
RESET
2
	3,5,7

Loading and Changing Compact Discs

The CD disc changer can contain up to three 12 cm or 8 cm compact discs without using an adapter.

Never force the compact disc carrousel when opening and closing the compartment.

Never press down or place objects on the carrousel.

Always treat your compact discs with care; refer, if necessary, to the section entitled “Precautions When Using Compact Discs” on

page 24 .

1	Switch the system on by pressing STANDBY/ON.
2	Press the OPEN/CLOSE(	) button on the front panel.
	Result: The compartment opens.
3	Place one disc in the front slots of the carrousel, with the label on the
	discs facing upwards.
	Check that the compact disc has been correctly inserted in
	the holder before closing the compartment.
4	If you wish to load another disc, press the DISC CHANGE
	button on the front panel (or DISC SKIP on the remote control).
	Result: The carrousel rotates by 120°.
5	Close the compartment by pressing the OPEN/CLOSE(			) button
	again.
	If you wish to start playing a disc directly, you can also
	proceed as follows.
	To play...	Press...
	Disc 1	CD/MP3-CD (	) or Disc 1
	Disc 2	Disc 2
	Disc 3	Disc 3
	Result: The compartment closes automatically and the disc selected
	starts playing.
6	To change or unload the compact disc changer, repeat Steps 2 to 5.

Keep the compartment closed whenever you are not using it, to prevent dust from entering.

You can load or unload compact discs when the radio, tape or auxiliary source function is selected.

5	4	2,5
1
5

To replay the CD/MP3-CD

GB

This is a player that enables the playback of audio CD, CD-R, CD-RW and MP3-CD and does not possess the function that saves MP3 files.

Do not use CDs of irregular shapes like heart or octagon shapes. The performance of the player may be degraded.

At least more than one CD should be inserted for playbacks.

1	Press the STANDBY/ON button to switch on the power.
2	Press the CD/MP3-CD(	) of the main unit to select the CD function.
3	Insert more than one CD or a MP3-CD.
4	Press the CD/MP3-CD(	) button of the main unit or the	button
	of the remote control.

If there are more than one CD or an MP3-CD inserted, replays are then processed in order.

Your CD Player will take a few moments to scan through all the tracks recorded on a particular MP3-CD.

The English name of the song may be indicated on the display only if directly downloaded from the PC or if the purchased MP3-CD is sorted according to titles(directory). (Other languages besides English may not be indicated.)

The English name of the track may not be indicated depending on the characteristics of the MP3-CD.

<CD Playback>		<During the MP3-CD playback>
			Track	Indicator
Track Indicator
	Playtime Indicator
		Title(Directory) Indicator Playtime Indicator

5 Adjust the volume according to needs with the following procedures.

Turn the VOLUME + or – control of the main unit.

or

Press the VOLUME + or – button of the remote control.

6 If it is desired to pause while the playback is processing, press the
CD/MP3-CD(	) button.

Press the CD/MP3-CD( ) button once again to playback again.

7 To stop playback, press the button.

A new disc may be inserted in the remaining two compart- ments excluding the CD which is being played back. Press the DISC CHANGER button to open the CD tray. The revolving part does not turn during playbacks.

If there is not even one CD inserted in the CD tray, it is indicated as “NO DISC”.

If the CD REPEAT function is not selected, 3 CDs are played back which automatically stops.

1
2,4,6	5
	7
COUNT
RESET

8 9