Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
The loudspeaker connector terminals are located on the rear of the system. There are two terminals on the system:
left speaker (marked L) right speaker (marked R)To achieve the correct sound quality,insert those speaker connector cables to the speaker connector terminals of the system.
LINE OUT |
| VIDEO OUT |
R | L |
|
PR | PB | Y |
COMPONENT VIDEO OUT | ||
| SPEAKERS OUT | |
(IMPEDANCE 4 ) | ||
| R | L |
| SPEAKERS OUT | ) | |
R | (IMPEDANCE 4 | ||
R | L | L |
Connecting to a TV | ENG |
Please be sure to turn off the power and unplug the power cord before moving or |
|
installing this unit. |
|
Please choose one method. |
|
1 | In on your TV. | 2 of TV control to set the TV to "VIDEO". | CONNECTIONS |
Method 1) Using Video Out |
|
| |
| Connect Video Out on the player to Video | Press the TV/VIDEO button on the remote |
|
•Place it on a stand or cabinet shelf, or under the TV stand.
Speakers L R•Place these speakers in front of your listening position, facing inwards (about 45°) toward you.
•Place the speakers so that their tweeters will be at the same height as your ear.
The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
|
|
| • | This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support |
| Note |
| • | Progressive Video. (It does not work on TVs with conventional component inputs, i.e., |
|
| Composite Video: A single video signal that is a composite of the | ||
|
|
|
| scan TVs.) |
|
|
| • | information (Y) and the color information (C). |
|
|
| ||
|
|
| Depending on the brand and model of your TV, this function may not work. | |
|
|
| • | The SCART(RGB output) does not support Progressive scan mode. |
•Installation in a place near heating apparatus, under direct lay of light or with high humidity may cause performance degradation of the speaker.
•Do not install on the wall or on a high place of pole or other unstable place to prevent any safety accident caused by falling of the speaker.
•Do not take the speaker near from TV or computer monitor.
The speaker near the TV or computer monitor may influence the quality of the screen display.
9 | 10 |