Connecting to a TV(Con’t)
Please be sure to turn off the power and unplug the power cord before moving or installing this unit.
Please choose one method.
Method 2) Component VideoUse this method if your TV have Pr,Pb andY jacks.If you television is equipped with Component Video inputs,connect a component video cable from the Pr,Pb and Y jacks on the back panel of the system to the corresponding jacks on your television.
COMPONENT
IN
RADIO ANTENNA
FM (75 )
LINE OUT 
VIDEO OUT
RL
PPY
COMPONENT VIDEO OUT
(not supplied)
SPEAKERS OUT (IMPEDANCE 4
)
RL
(not supplied)
P.SCAN (Progressive Scan) Function ENG
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines.
Press and hold P.SCAN button on the remote controller for over 5 seconds in stop |
| ||
| mode. |
| CONNECTIONS | |
• Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan" | |||
| |||
repetitively. |
|
| |
What is Progressive (or |
| ||
Interlaced Scan (1 FRAME = 2 FIELDS) | Progressive Scan (FULL FRAME) |
| |
In | The progressive scanning method scans one full frame of |
interlaced fields (odd and even), where each field | video consecutively down the screen, line by line. |
contains every other horizontal line in the frame. | An entire image is drawn at one time, as opposed to the |
The odd field of alternating lines is displayed first, and | interlaced scanning process by which a video image is |
then the even field is displayed to fill in the alternating | drawn in a series of passes. |
gaps left by the odd field to form a single frame. | The progressive scanning method is desirable for dealing |
One frame, displayed every 1/30th of a second, contains | with moving objects. |
two interfaced fields, thus a total of 60 fields are |
|
displayed every 1/60th of a second. |
|
The interlaced scanning method is intended for capturing |
|
a still object. |
|
Note • This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support 
Progressive Video. (It does not work on TVs with conventional component inputs, i.e.,
scan TVs.)
•Depending on the brand and model of your TV, this function may not work.
•The SCART(RGB output) does not support Progressive scan mode.
11 | 12 |