Setting the Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the rear speakers.
ENG
| 1 |
| In Stop mode, |
|
| Press Cursor button | |
|
|
|
| to move to ‘Audio’ and | |||
|
| press MENU |
|
| |||
|
|
| 2 then press ENTER | ||||
|
| button. |
| ||||
|
|
|
|
|
| button. | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Press Cursor 
button
3 to move to ‘DELAY TIME’ and then press ENTER button.
Press Cursor 
, 
,
4
, 
buttons to move to the desired speaker and then press ENTER button.
5 Press Cursor 
, 
to set the Delay time.
•You can set the delay time for C between 00 and 05mSEC and for LS and RS between 00 and 15mSEC.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Surround Speakers.
Note |
•With
•The Center Speaker setting is not available for no center speaker.
49
•Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.
Distance between Df and Dc | Delay Time |
|
|
0.00 m | 0 ms |
0.34 m | 1 ms |
0.68 m | 2 ms |
1.02 m | 3 ms |
1.36 m | 4 ms |
1.70 m | 5 ms |
|
|
•Setting REAR () SPEAKERS
If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.
Distance between Df and Ds | Delay Time |
0.00 m | 0 ms |
1.02 m | 3 ms |
2.04 m | 6 ms |
3.06 m | 9 ms |
4.08 m | 12 ms |
5.10 m | 15 ms |
|
|
Ideal CENTER
SPEAKER placement
Ideal
SPEAKER placement
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from REAR SPEAKER
50
