Hobart OV210 manual Temperature And Timer Control Settings

TEMPERATURE AND TIMER CONTROL SETTINGS

OVEN

TEMP.

Actual Temperature In Oven

SET

TEMP.

HEAT ON

Max.Temp. 525 F O/ 274 C O

TIMER

	ON
Minutes Set	Remaining

		STEAM
		ON
Seconds
		DELAY
		(AIRFLOW)
		ON
Minutes		Heat is disabled
		during this delay
		QUICK
		SET
Number 0-84
TEMP.	TIMER	STEAM	DELAY
CLEAR	CLEAR	CLEAR	CLEAR
or SET	or SET	or SET	or SET
			QUICK
1	2	3	SET
			CLEAR
			or SET
4	5	6	START
			RESUME
			STOP
7	8	9	0

VENT POWER PULSE AIRFLOW

OPEN (LIT) ON AUTO

CLOSED (OFF) OFF OFF

The temperature and timer controls are factory set to degrees Fahrenheit with minutes set and minutes remaining. If desired, the controls can be changed to degrees Celsius and/or hours and minutes remaining as follows:

1.Press TEMP. and enter 99 on the number keypad. Do the same for TIMER, STEAM and DELAY. Wait 5 seconds for displays to change to 0.

2.Press TEMP., then enter:

•0 for Fahrenheit with minutes set and minutes remaining (factory setting).

•1 for Celsius with minutes set and minutes remaining.

•2 for Fahrenheit with hours and minutes remaining.

•3 for Celsius with hours and minutes remaining.

3.Press QUICK SET, enter 0 on the number keypad, then press START.

4.Turn OFF the power switch for at least 3 seconds, then turn it back ON. The oven should now be in the temperature and timer mode you chose.

5.If needed, attach the HOURS-MINUTES label (located on the inside of the front control door) to the digital control panel.

PL-56153

– 12 –