Hobart OV210 manual Programming The Quick Set Menu

PROGRAMMING THE QUICK SET MENU

OVEN

TEMP.

Actual Temperature In Oven

SET

TEMP.

HEAT ON

Max.Temp. 525 F O/ 274 C O

TIMER

	ON
Minutes Set	Remaining

		STEAM
		ON
Seconds
		DELAY
		(AIRFLOW)
		ON
Minutes		Heat is disabled
		during this delay
		QUICK
		SET
Number 0-84
TEMP.	TIMER	STEAM	DELAY
CLEAR	CLEAR	CLEAR	CLEAR
or SET	or SET	or SET	or SET
			QUICK
1	2	3	SET
			CLEAR
			or SET
4	5	6	START
			RESUME
			STOP
7	8	9	0

VENT POWER PULSE AIRFLOW

OPEN (LIT) ON AUTO

CLOSED (OFF) OFF OFF

Quick Set stores up to 84 programs that can be stored in memory and recalled by number when needed. A program is a set of baking instructions - TEMP., TIMER, STEAM and DELAY settings - that the operator defines for any baking operation.

1.Press TEMP. and enter 99 on the number keypad. Repeat this step for TIMER, STEAM and DELAY.

2.Wait for displays to change to 0.

3.Press TEMP. and enter the desired temperature value on the number keypad. Repeat this step for TIMER, STEAM and DELAY. These settings are optional and can be left at 0 if desired. To clear an entry, press TEMP., TIMER, STEAM or DELAY again.

4.Press QUICK SET and enter the previously selected number (1 through 84) on the keypad.

5.Press START. The QUICK SET display reads 0 when the settings have been accepted.

6.Record QUICK SET program numbers, and product associated with them for future reference.

7.To store additional Quick Set settings, repeat steps 1 through 6.

8.Turn power switch to OFF for at least 3 seconds, then turn it back ON.

PL-56153

– 10 –