Samsung MAX-DC20800 Listening to Radio, Presetting Stations, Remote Control Unit, Press the

Listening to Radio

You can listen to the chosen band (FM, (SW1,2),MW broadcast stations) by using either the automatic or manual tuning operation.

Presetting Stations

You can store up to:

15 FM stations

5 MW stations or 15 FM stations 15AM stations

5 SW1 stations

5 SW2 stations

Remote Control Unit

Example: Presetting FM 89.1 in the memory

1 Press TUNER/

BAND button.

•The selection toggles back and forth between "FM

➝(SW1,2) ➝MW" each time the TUNER(BAND) button is pressed.

2 Tune in to the desired station.

	Press	button to select
Automatic Tuning 1
	the preset station.

Automatic Tuning 2	Press and hold	button
	to automatically search the band.

Manual Tuning Briefly press button to increase or decrease the frequency incrementally.

Press the

1TUNER(BAND) button and select the FM band.

•Each time the button is pressed, the band switches between "FM ➝ (SW1,2) ➝MW".

kHz

MHz

2 Press to select "89.10".

•Refer to Step 2 on page 41 to automatically or manually tune in to a station.

kHz

MHz

3 Press the TUNER MEMORY button.

•“PROGRAM” flashes in the display.

PROGRAM

kHz

MHz

Main Unit

Press the TUNER/BAND

1 button to select the desired band (FM, (SW1,2),MW).

2 Select a broadcast station.

Automatic Tuning 1 Press the STOP ( ) button

to select PRESET and then

press button or turn Multi Jog Knob to select the preset station.

Automatic Tuning 2 Press the STOP ( ) button to

select "AUTO" and then press button or turn Multi-Jog Knob to

automatically search the band.

Manual Tuning Press STOP ( ) to select MANUAL and then briefly

press or turn Multi Jog Knob to tune in to a lower or higher frequency.

4	Press	to
	select preset
	number.

•You can select between 1 and 15.

PROGRAM

kHz

MHz

5	Press the TUNER	6	To preset another
			station, repeat
	MEMORY button.
			steps 2 to 5.

• Press the TUNER MEMORY button before	RADIO
‘PROGRAM’ disappears from the display.	OPERATION
• ‘PROGRAM’ disappears from the display
and the station is stored in memory.

kHz	Note
MHz

• When listening AM/SW , (Dolby Pro Logic II) button does not work.

Press MONO/ST button to listen in Mono/Stereo.

(This applies only when listening to an FM station.)

• Each time the button is pressed, the sound switches between "STEREO" and "MONO".

57 • In a poor reception area, select MONO for a clear, interference-free broadcast.

To tune in to a preset station, press on the remote control to select a channel.

58