To disable the settings timeout feature

You can disable the settings timeout feature if you do not want the printer to revert to the default settings after two
minutes of inactivity or after the printer is turned off.
1From the printer control panel, press .
2Press the up or down arrow button to scr oll to Device Setup, and then press .
3Press the up or down arrow button to scr oll to Clear Settings Timeout, and then press .
4Press the up or down arrow button to scr oll to Never, and then press .
Resetting to factory settings
Resetting to factory default settings will delete all the printer settings you have previously selected.

Using the printer control panel men us

1From the printer control panel, press .
2Press the up or down arrow button to scr oll to Defaults, and then press .
3Press the up or down arrow button to scr oll to Set Defaults, and then press .
4Press the up or down arrow button to scr oll to Use Factory, and then press .
5When prompted to set the initia l settings of your printer, mak e your selections using the printer control panel
buttons.
Initial Setup Complete appears on the display.

Using a button combination (if you c annot read the current

language)

1Turn off the printer.
Note: If you have set the Power Saver timeout in the Setup menu, then press and hold for three seconds to
turn off the prin ter.
2From the printer control panel, press and hold and , and then press and release to turn the printer on.
Note: Do not release and until Language appears on the display, indicatin g that the printer has been
reset.
3When prompted to set the initia l settings of your printer, mak e your selections using the printer control panel
buttons.
Initial Setup Complete appears on the display.
Using the printer con trol panel buttons and menus
17