Load up to
20 sheets of banner paper
Make sure
•The print side of the banner faces down.
•The leading edge of the banner paper feeds into the printer first.
•If your printer has more than one paper tray, then load banner paper in Tray 1.
To load banner paper:
1Pull the tray completely out of the printer.
2Remove all paper from the tray.
3Move the paper guides as though you were loading
4Squeeze the lever and pull to extend the tray to legal size.
5Tear off only the number of pages needed to print the banner.
6Set the stack of pages in front of the printer.
7Slide the first sheet from the stack of pages over the tray handle and all the way into the back of tray.
Saving paper default settings
You can set the default paper size, paper type, and photo print size for the documents and photos that you print.
Note: These default settings apply only to print, copy, and scan jobs that you initiate from the printer.
1From the printer control panel, press 
.
2Choose the default settings:
•If you want to set the default paper size:
a | Press to select Paper Setup. |
b | Press the up or down arrow button to scroll to Paper Size, and then press . |
cPress the up or down arrow button to select the default paper size for the printer, and then press 
.
•If you want to set the default paper type:
a | Press to select Paper Setup. |
b | Press the up or down arrow button to scroll to Paper Type, and then press . |
cPress the up or down arrow button to select the default paper type for the printer, and then press 
.
•If you want to set the default photo print size:
aPress the up or down arrow button to scroll to Defaults, and then press 
.
bPress 
to select Photo Print Size.
Loading paper and original documents
29
