“Printer is printing blank pages” o n page 112
“Printer is busy or does not respond” on page 112
“Cannot delete doc uments from the print queu e” on page 112
“Cannot print through USB” on pag e 113
Incorrect language appears on the display
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
CHANGE THE LANGUAGE USING THE PRINTER MENUS
1From the printer control panel, press .
2Press the arrow buttons to scroll to Defaults, and then press .
3Press the arrow buttons to scroll to Set Defaults, and then press .
4Press the arrow buttons to scroll to Use Factory, and then press .
5Complete the initial printer s etup.
CHANGE THE LANGUAGE USING A BUTTON COMBINATION (IF YOU CANNOT READ THE CURRENT
LANGUAGE)
1Turn the printe r off.
Note: If you have set the Power Saver timeout in the Setup menu, then press and hold for th ree seconds to
turn off the prin ter.
2Press and hold down and , and then press and release to turn the printer on.
Note: Do not release and until Language appears on the display, indicatin g that the printer has been
reset.
3Complete the initial printer s etup.
Printhead errors
If the "Before you troubleshoot" checklist does not solve the problem, then try the follo wing:
Troubleshooting
108