1Insert a USB Bluetooth adapter into the USB port.

Bluetooth Dongle Connected appears on the display.

Notes:

Warning—Potential Damage: Do not touch any cables, any network adapter, any connector, the USB Bluetooth adapter, or the printer in the areas shown while actively printing, reading, or writing from a Bluetooth-enabled device. A loss of data can occur.

A Bluetooth adapter is not included with the printer.

Your printer automatically switches to Bluetooth mode when you insert a USB Bluetooth adapter.

2Make sure the printer is set up to receive Bluetooth connections. For more information, see “Setting up a connection between your printer and a Bluetooth-enabled device” on page 41.

3Set up the Bluetooth device to print to the printer. For more information, see the documentation for your Bluetooth device.

4See the documentation for your Bluetooth device to begin printing.

Note: If the Bluetooth Security Level on the printer is set to High, you must enter a pass key.

Printing on both sides of the paper (duplexing)

Printing on both sides of the paper (duplexing) automatically

The automatic duplex unit, available only on selected printer models, supports letter- and A4-size paper. If you purchased a model without automatic duplex, or if you need to print duplex using other paper sizes, then see the instructions for printing on both sides of the paper (duplexing) manually.

1With a document open, click File Print.

2Click Properties, Preferences, Options, or Setup.

3Click the Advanced tab.

Printing

43

Page 43
Image 43
Dell 5dw, V715W, 1dw manual Printing on both sides of the paper duplexing automatically